12,270
edits
FireBrick SIP Configuration: Difference between revisions
→Next create some users:
|
==Next create some users:==
Config - Edit - Setup - Edit VoIP config▼
These will be your local SIP user accounts that your telephones use to register against the FireBrick with.
▲Go to: Config - Edit - Setup - Edit VoIP config
Add new VoIP user:
|}
Click save.
You can repeat this process for your other users, changing the extn each time, eg 102, 103 etc.
At this point you can configure your SIP phones to register to the FireBrick with the credentials you've specified above.
You can then test by calling each other using the extn numbers assigned.
You will also be able to dial out.
Incoming calls will not work yet, as the Carrier above is set to send calls to extension 100, which we've not created... yet...
==Create a Ring Group==
This will be our ring group for incoming calls
Go to: Config - Edit - Setup - Edit VoIP config
Click Add New
{| border="1" cellpadding="1" cellspacing="1"
|-
| name
| Main
|-
| display-name
| The name that will display on the phone, eg Main
|-
| extn
| 100 - this is the extension number used in the Carrier section above
|-
| ddi
| the telephone number.
|-
| ring
| space separate list of the internal extension numbers to ring, eg 101 102 103
|-
| type
| This is the ring type, eg to ring all at once etc.
|}
| |||