Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Ethernet Port Settings: Difference between revisions

Ethernet Port Settings (view source)

Revision as of 10:16, 12 November 2021

440 bytes added ,  12 November 2021
m
→‎1Gb/s
m (clean up, typos fixed: differenciate → differentiate, 100Mb/s → 100Mbit/s (6), a un → an un)
 
==1Gb/s==
For 1Gbit/s bearers, the linkconnection from the Openreach to the customer equipment is presented using singlemultimode mode fibre on SCLC connectors,. andA yousuitable willSFP needfor the customer equipment would be a fibre550m portMMF 850nm SX SFP and fibrea patchlength leadof tomultimode connectcable towith theLC serviceconnectors at each end. Weyour canrouter/switch supplywould also need a mediaSFP converterport. ifWe youcan requiresupply whicha willsuitable convertSFP toand RJ45cable copperif Ethernetyou require.
 
In most cases, it is possible to replace the Openreach supplied SFP with something different, eg a DAC cable, this may light an error LED on the Openreach box though, and so cause confusion in the event of a fault. We'd also require that the Openreach supplied SFP is used in the event of a fault report.
This link should be used with an auto-negotiation port which is the default for giga-bit links▼
 
▲This link should be used with an auto-negotiation port which is the default for giga-bitgigabit links
 
==10Gb/s==
AA-Andrew
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,467

edits

Retrieved from "http://support.aa.net.uk/Special:MobileDiff/15463"