12,270
edits
Ethernet Port Settings: Difference between revisions
m
→1Gb/s
m (→1Gb/s) |
m (→1Gb/s) |
||
|
[[File:Etherway-ONT.JPG|thumb|1G ONT]]
For 1Gbit/s bearers, the connection from the Openreach to the customer equipment is presented using multimode mode fibre on LC connectors. A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port. We can supply a suitable SFP and cable if you require.
This link should be used with an auto-negotiation port which is the default for gigabit links▼
In most cases, it is possible to replace the Openreach supplied SFP with something different, eg a DAC cable, this may light an error LED on the Openreach box though, and so cause confusion in the event of a fault. We'd also require that the Openreach supplied SFP is used in the event of a fault report.
The ONT requires power, and has two IEC sockets for resilience. eg, you can use a UPS on the 2nd power socket to power the unit in the event of mains power loss.
▲This link should be used with an auto-negotiation port which is the default for gigabit links
==10Gb/s==
| |||