12,270
edits
Ethernet Port Settings: Difference between revisions
m
no edit summary
m (→1Gb/s) |
mNo edit summary |
||
|
The Ethernet services are presented in different ways depending on the link speed you have requested.
===100Mb/s===
For 100Mbit/s links (and below) the service is presented using a normal Ethernet (copper) RJ45 connector. You use a normal cat-5 Ethernet patch lead to connect this to your switch, router or firewall as you required.
Cabling is a straight through cat5e patch lead to your managed switch.
===1Gb/s===
For 1Gbit/s bearers, the connection from the Openreach NTE to the customer equipment is presented using multimode mode fibre on LC connectors. A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port. We can supply a suitable SFP and cable if you require.
</gallery>
===10Gb/s===
For 10Gbit/s you will need special 10Gbit/s equipment, contact sales when ordering for details.
| |||