12,270
edits
VoIP Phones - Yealink DECT: Difference between revisions
m
no edit summary
mNo edit summary |
|||
|
|contact us
|}
The PIN is used to register handsets to the base station, and for the handset to access settings from the base station. When a Base and a handset are supplied together in a single box, then the handset should already be registered to the base station. You can use these steps to register additional handsets though:
= IP address =▼
By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows: ▼
# Press 'Ok' on the handset and 'Ok' on 'Status'▼
# Select 'Base' and press 'Ok'▼
# Under IPv4 you will see the IP address e.g. 192.168.1.3 (different for each user).▼
# Enter that IP in the address bar of your Web browser.▼
# Login with admin credentials. (default is user:admin password:admin).▼
<gallery widths=200px heights=200px mode="nolines">▼
File:Handsetstatus.jpg|3.1 Press Ok on the handset and Ok on Status▼
File:Hansetbase.jpg|3.2 Select Base and press Ok▼
File:Handsetipadd.jpg|3.3 Under IPv4 you will see the IP address.▼
</gallery>▼
=Registering an additional Handset=
File:Handsetreg2.jpg|2.6. Press Register Handset.
</gallery>
▲= IP address =
▲By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows:
▲# Press 'Ok' on the handset and 'Ok' on 'Status'
▲# Select 'Base' and press 'Ok'
▲# Under IPv4 you will see the IP address e.g. 192.168.1.3 (different for each user).
▲# Enter that IP in the address bar of your Web browser.
▲# Login with admin credentials. (default is user:admin password:admin).
▲<gallery widths=200px heights=200px mode="nolines">
▲File:Handsetstatus.jpg|3.1 Press Ok on the handset and Ok on Status
▲File:Hansetbase.jpg|3.2 Select Base and press Ok
▲File:Handsetipadd.jpg|3.3 Under IPv4 you will see the IP address.
▲</gallery>
=Yealink and Voiceless Settings=
| |||