12,270
edits
Ethernet Port Settings: Difference between revisions
m
→1Gb/s (More common)
m (→LED Status) |
|||
|
For 1Gbit/s bearers, the connection from the Openreach NTE to the customer equipment is presented using multimode mode fibre on LC connectors. A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port. We can supply a suitable SFP and cable if you require.
The Openreach NTE does have a copper RJ45 port as well as an SFP port for connection to the customer router - however, '''the copper port is disabled by Openreach and the fibre port should be used.'''
This link should be used with an auto-negotiation port which is the default for gigabit links
Adva-closeup.png|Close up
</gallery>
===100Mb/s (Less common) ===
| |||