Difference between revisions of "VoIP Phones - Gigaset N300"

Jump to navigation Jump to search
no edit summary
These notes are the same for configuring an S685IP, A580IP and N300A too.
 
If there are problems in setting up the S685IPbase station it is easiest to start from a factory reset condition. This can be achieved by holding the blue button on the front of the base unit while power cycling it. After this the handset will need to be re-registered with the base unit (hold the blue button on the base unit while power cycling the handset). The pin should be changed from its default value of 0000 using the handset.
 
Starting from a factory reset, the following items need to be set using the web server in the base unit.
 
=== IP address: ===
 
By default the base unit picks up an ipIP address using DHCP. This can be over-ridden by connecting to "Settings ->> IP Configuration", selecting "Static" and filling in the address details as required. Then click on the "Set" button.
 
=N300 and Voiceless=
Don't forget to secure the base station with a new PIN!
 
 
 
If there are problems in setting up the S685IP it is easiest to start from a factory reset condition. This can be achieved by holding the blue button on the front of the base unit while power cycling it. After this the handset will need to be re-registered with the base unit (hold the blue button on the base unit while power cycling the handset). The pin should be changed from its default value of 0000 using the handset.
 
Starting from a factory reset, the following items need to be set using the web server in the base unit.
 
=== IP address: ===
 
By default the base unit picks up an ip address using DHCP. This can be over-ridden by connecting to "Settings -> IP Configuration", selecting "Static" and filling in the address details as required. Then click on the "Set" button.
 
<br>
 
=== Audio settings: ===

Navigation menu