FireBrick VoIP: Difference between revisions

Carrier and Users are separate - Your the phones uses the 'VoIP users' configuration section, and the Carrier configuration is in the 'VoIP carriers' section of the FireBrick config. -The FireBrick doesn't pass on authentication on your phone over to your carrier. You'll need a configuration entry for each of your carriers and each of your phones. At a basic level you can just have a 1-to-1 mapping of carrier to phone, or you can use the FireBrick PBX features for a more comprehensive setup where the FireBrick is able to offer features such as ring groups, call pickup etc.

 

*[[FireBrick SIP Configuration]]

This page describes how to configure the FireBrick to work with SIP phones and Carriers. See below on how to then configure phones to register against your FireBrick.