TalkTalk Wholesale Line Profiles: Difference between revisions

To change the profile, select the one you like, and then press Profile to make the change. It will just take a few seconds to apply, and the line will resync.

 

On the positive side, changing the profile can:

*Increase throughput speed

We will be improving the Profile settings in the near future by making it easer to select and choose the correct profile for your line. Including making the Profile more readable and offering suggestions as to what profile to choose to do certain things.

 

*We have a table of all the available profiles, [[TalkTalk Wholesale Line Profiles List|See here]]

 

Annex A line profiles are of the form:

XYYY_SNR_DDD_UUU_Protocol

*Protocol indicates if the profile is tied to a specific ADSL protocol. Where this is negated, the profile will negotiate with the CPE starting at ADSL2+ and working down to G.DMT.

 

Annex M line profiles are of the form:

MXYYY_SNR_DDD_UUU:MInpN

*MInpN denotes the Impulse Noise Protection values. Where this is set to 0 there is in none, else the values are that for Downstream followed by upstream, H denotes 1⁄2 a tone.

 

There are a few diagnostic profiles that can be used to isolate faults.