Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VoIP Phones - Gigaset N300: Difference between revisions

no edit summary
mNo edit summary
No edit summary
|No
|-
|Tested on [[FireBrick SIP]] Server
|Yes
|-
|[[IPv6]] Support
|No
|}
 
These notes are the same for configuring an S685IP, A580IP and N300A too.
 
Update to new firmware here https://gigaset.atlassian.net/wiki/display/GPPPO/N510+IP+PRO+Release+notes+42.192;jsessionid=F1311720EDB5590D7D07F46655951B91
 
If there are problems in setting up the base station it is easiest to start from a factory reset condition. This can be achieved by holding the blue button on the front of the base unit while power cycling it. After this the handset will need to be re-registered with the base unit (hold the blue button on the base unit while power cycling the handset). The pin should be changed from its default value of 0000 using the handset.
 
{| class="wikitable"
!colspan="2"|[[Gigaset]] N300 Settings
|-
!Setting
All the other fields can be left as they are unless you are using NAT in which case the "Stun enabled" button should be selected and the "Stun server" set to stun.aaisp.net
 
When everything is entered click on the "Set" button. The display will return to the "Settings -> Telephony -> Connections" menu. Check that "IP1" is active and that the status is "Registered". You may wish to disable "[[Gigaset]].net" in this menu. It should now be possible to make and receive calls.
 
==Firewall & Security==
43

edits