Revision as of 20:00, 23 April 2014 (view source) Camlin (talk \| contribs) No edit summary ← Older edit		Revision as of 20:09, 23 April 2014 (view source) Camlin (talk \| contribs) No edit summary Newer edit →
= Configuration = == Vigor == The good thing is that a UK variant of the [[Vigor 120]] modem will typically just works fine with its factory settings (so an easy way to get it quickly ready could be to just hard reset the thing). Plug the Vigor into a PC and point a browser at it. Check the output of "netstat -r"/"ipconfig /all"/"ip r" to find out its address (probably 192.168.1.1/24). There is no username and password by default. Now give it a new address and admin password. Make sure that it gets SHOWTIME for ADSL. It wont be able to login yet but at least you can verify the ADSL bit. You don't need to enter your A&A username and password there as this will be done in pfSense (when setting PPoE). Now, it could still be an idea to check the settings and change the default password. In which case, just plug the Vigor into a PC, point a browser at it (typically will be listening on 192.168.1.1) and follow the user docs. If you check the web front end , make sure that it gets SHOWTIME for ADSL (otherwise it means you have a problem with the ADSL connection to start with). == REST OF WIKI PAGE STILL TO BE DONE... ==

Router - PFSense v2.1.2+ (view source)