Revision as of 20:40, 23 April 2014 (view source) Camlin (talk \| contribs) m (Camlin moved page Router - PFSense2.1 to Router - PFSense v2.1.2+) ← Older edit		Revision as of 20:41, 23 April 2014 (view source) Camlin (talk \| contribs) No edit summary Newer edit →
== REST OF WIKI PAGE STILL TO BE DONE... == ~~== pfSense ==~~ Follow one of the many guides out there. It can be tricky to work out which interface is which, so plug one in, configure it at the initial console based interface setup stage, give it an IP address from your LAN range and set the mask. Then try and ping it after putting another address from the range temporarily on a PC or whatever. If it doesn't work then move the LAN cable into another NIC and see if that works. Once LAN is sorted, fire up a browser and point it at the LAN address and carry on the configuration from there. Username: admin, password: pfsense. I recommend you move the web GUI port to another port and enable SSL. There's a built in certificate generator so there is no excuse.

Router - PFSense v2.1.2+ (view source)