Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

IPv6: Difference between revisions

IPv6 (view source)

Revision as of 10:45, 19 June 2014

847 bytes added ,  19 June 2014
m
no edit summary
mNo edit summary
Pages with IPv6 information on our main website:
 
*[http://aaispaa.net.uk/kb-broadband-ipv6.html General IPv6 information]
*[http://aaispaa.net.uk/kb-broadband-ipv6-plans.html IPv4 depletion plans]
*[http://aaispaa.net.uk/kb-broadband-ipv6-nat64.html NAT64 gateway] (Mapping IPv6 traffic so you can get to IPv4 servers on the Internet.
 
See the [[IPv6 Configuration]] page for more details on hardware and configuration.
 
=IPv6 on AAISP Broadband=
This is how we route and assign IPv6 on DSL connections.
 
Customers are allocated a /48 block of addresses - this is usually per customer, and so a customer with multiple circuits or sites will have a /64 allocated from the larger /48 block.
 
(Here, CPE refers to the router belonging to the customer which is being used at their end of the broadband line.)
 
 
When the CPE logs in and negotiates PPP we use IPCPv6 to assign an IPv6 'WAN' address. This address is a single IPv6 address in the form of:
2001:8b0:1111:1111:[your IPv4 WAN in HEX]
 
At this point we will also be routing any IPv6 blocks to this WAN address. Usually a line will have at least one /64 block.
 
We also respond to DHCPv6 Prefix Delegation (PD) from the CPE and we'll tell the CPE one of the /64 Blocks. -this may be requested multiple times by the CPE.
 
 
[[Category:IPv6]]
AA-Andrew
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,264

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/5904’