editor
426
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
CrazyTeeka (talk | contribs) mNo edit summary |
|||
=Overview=
As there are 4 ports are we restricted to only bonding up to 3 ADSL/FTTC lines? No.
▲To overcome the physical port restriction a VLAN switch can be used, eg:
<pre>
ADSL MODEM 1 --
The switch would be set up for 4 (or more) separate VLANs on the appropriate ports, and on the FireBrick, the <ppp .../> config would have VLAN="n".
=VLAN Switch Config=
Here are some notes on setting up a HP ProCurve
The HP ProCurve 1810G-8 (J9449A) is a nice little 8 port managed switch. No fans and similar in size to a
==Overview==
The FireBrick will have a single WAN port, which will plug in to the HP Switch. The ADSL/FTTC modems will plug in to the HP Switch too.▼
▲The FireBrick will have a single WAN port, which will plug in to the HP Switch. The ADSL modems will plug in to the HP Switch too.
▲This will then, with VLANs, enable the 2700 to use up to 7 ADSL modems.
▲*Default IP = 192.168.2.10
▲*Default password = blank
==Save Config==
To make things a little easier, here is a saved config: [[File:FBVLANconfig1810G.bin.zip]]. It is the default config (default IP and password), but with VLANs as follows:
*Port 1 - VLAN 101, for ADSL line 1
*Port 2 - VLAN
*Port 3 - VLAN
*Port 4 - VLAN
*
The config was from HP ProCurve 1810G - 8 GE, P.1.17, eCos-2.0, Software Version, P.1.17
==Basic Settings==
*Set your computer to an IP in the same subnet as the switch, eg. 192.168.2.11
*
▲*log in to http://192.168.2.10 with a blank password
▲*Maybe set the System description details
▲*Set Admin Password (Maintenance - Password Manager) then Save and re-login.
*Enable HTTPS (Security - Secure Connection) generate certificate and apply
== Create VLANs. ==
We will set ports 1-4 to be
▲We will set ports 1-4 to be vlans 101, 102, 103 104. We'll port 8 for plugging in to the FireBrick, and port 7 for our admin.
*Create 4 VLANs (VLANS - VLAN Configuration)
*Set the names to be ADSL1, ADSL2, ADSL3, ADSL4 - this will match the login/line numbers of the ADSL/FTTC lines
[[File:1810G-8-VLANSList.png|border]]
==Configure ports for VLAN tagging:==
*Under VLANs - Participation Tagging
**set VLAN 101 to be U on port 1 and T on port 8. E on rest
**set VLAN 102 to be U on port 2 and T on port 8. E on rest
==IP Address==
In order to access the Switch, we'll need to setup a interface on the
Alternately, we can use a public /30. This will involve a new /30 allocation on Clueless, routed to all the ADSL/FTTC lines, and on the
Set the gateway to the FireBrick, then the switch can access things like time server, syslog server etc...
[[Category:Bonding]]
|