Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick 2700 Configuration run-through: Difference between revisions

FireBrick 2700 Configuration run-through (view source)

Revision as of 21:16, 15 February 2011

73 bytes added ,  15 February 2011
→‎Native IPv6
</syntaxhighlight>
 
'''DNS auto-config''':
 
( since release V0.02.039 )
 
The previous config will allow your IPv6-enabled clinets to auto-configure an IP address, and default route from the Router Announcements from the FB. To configure IPv6 DNS server addresses ( DNS servers that are to be queried over IPv6 ), then there are a couple of options. Very recent clients may be RFC6106 aware, and be able to recieve DNS server addresses along with the other config in the same Router Announcement formfrom the FB, using the RDNSS option. To enable this, set the ra-dns option to point to your IPv6 Recursive DNS Server ( in this example, I've added a static IPv6 address 2001:8B0:B7:1::2 to my DNS server box, obviously point it to your own! ):
 
<syntaxhighlight>
Feanor
49

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/660’