49
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 14:40, 18 February 2011
, 18 February 2011→PPPoE
(→PPPoE) |
|||
|
*A standard issue AAISP ZyXEL P660-D1, in bridge mode (Go to: Wan - Wan setup, mode Bridge, Encapsulation RFC1483, Multiplex LLC)
*Another ADSL router set for bridge mode
*A modem such as a Draytek Vigour 120
Note: You cannot just use any of these devices on any line type: There are combinations that will work, and combinations that will not. You MUST read the link above. In short, BT lines can auto-detect PPPoA or PPPoE, so will work with pretty much anything. BE lines on the other hand are hard-coded to either PPPoE OR PPPoA. For a BE PPPoE line, a simple bridge more router like the ZyXEL is the correct choice. For a BE PPPoA line, you need a device that can do true PPPoA on the wire <-> PPPoE on the LAN to the FB. The Vigour 120 is one of the only devices that can do this.
In our default config, you can see that we already have some PPPoE settings:
| |||