49
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 12:28, 22 February 2011
, 22 February 2011→Accessing the Modem
|
For example, on the ZyXel P-660R, you will have configured the IP and Netmask on the 'LAN' tab. But there's no 'Gateway', so we must go to 'Advanced' -> 'Static Routes' tab, and create one. Enter it as follows: IP, Mask = base address of your internal LAN; eg: 81.xx.xx.0, 255.255.255.192. The 'Gateway' address is pointing back at the FB, eg 192.168.1.1. Check the box to Activate the route, hit the 'Apply' button, and that's it done.
On the Vigour 120, you need to telnet in to the CLI to set the route.
The commands to set a route back to 81.x.x.0 via the FB at 192.168.1.1 are:
ip route status
ip route add 81.x.x.0 255.255.255.192 192.168.1.1 static
ip route status
The Draytek CLI reference may be found here:
ftp://ftp.draytek.com/Document/Telnet_Commands_V1.11.zip
Now, the assuming the Modem is on 192.168.1.2, you'll be able to access it from the LAN side of the FireBrick.
| |||