12,270
edits
General Router Settings: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
|
Please note that most DSL lines (BT and TT) do allow PPPoE mode. This can be useful when using a bridging modem. In such cases you need the LLC-Mux normally. For FTTC and FTTP the only operational mode is PPPoE directly with RFC4638 support allowing 1500 byte MTU.
=DNS Revolvers=
Your PC/router will normally be configured to obtain an IP address and DNS servers automatically, and so not need any special set up. This will depend on how you set up your network and your DSL router.
==IPv4==
*217.169.20.20
*217.169.20.21
These are provided to your router via PPP, and some routers will provide a DNS relay feature allowing you to use your local router LAN IP address as a DNS service. If configuring manually please use these two addresses as our main customer facing DNS resolvers.
==IPv6==
*2001:8b0::2020
*2001:8b0::2021
These are our customer facing DNS resolvers for IPv6 use. The DNS servers can be obtained by your router using DHCPv6 over PPP.
[[Category:Routers]]
| |||