12,270
edits
VMG1312-B10A: Factory Reset: Difference between revisions
m
no edit summary
mNo edit summary |
|||
|
==Overview==
There are 3 configuration settings that the router can be in:
*Configured for your line by AAISP
*AAISP default settings
*ZyXEL Factory settings
When supplied, the router will be in the 'AAISP default settings' state. This is a temporary state and the router will get its own configuration when it first logs in.
Holding in the reset button will revert the configuration back to the AAISP default settings. Further work is needed to revert the config back to the ZyXEL factory settings. See below.
==Reset to AAISP Defaults==
#Switch router on, wait for it to boot up
#With a paperclip, pen, etc, hold in the reset button
#Wait until the power light turns red (should be up to
#Release the reset button
#Wait for the router to boot up again
At this point you can reset the router for this to be applied. The router will then boot up in it's original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
In this state, the router has its default IP address, username and password.
[[Category:ZyXEL_VMG1312|Reset]]
| |||