IPv6 Routers: Difference between revisions
| Line 21: | Line 21: | ||
The Airport Extreme claims to support native IPv6 over PPPoE but we don't know of anyone who has it working. It still works via tunnels though (tunnel configuration explained on the [http://aa.net.uk/kb-broadband-ipv6-tech.html knowledge base]). You need to set the remote tunnel endpoint address to 81.187.81.6, and you need two /64 subnets off us that are statically routed to the Airport's IPv4 address. Assign an IP from one /64 as the WAN address and set the default route to our ping address "bottomless", which is 2001:8b0:0:81::51bb:51bb. Set the LAN address to the first usable IP on the second /64 and it should just work. |
The Airport Extreme claims to support native IPv6 over PPPoE but we don't know of anyone who has it working. It still works via tunnels though (tunnel configuration explained on the [http://aa.net.uk/kb-broadband-ipv6-tech.html knowledge base]). You need to set the remote tunnel endpoint address to 81.187.81.6, and you need two /64 subnets off us that are statically routed to the Airport's IPv4 address. Assign an IP from one /64 as the WAN address and set the default route to our ping address "bottomless", which is 2001:8b0:0:81::51bb:51bb. Set the LAN address to the first usable IP on the second /64 and it should just work. |
||
=TG582N= |
|||
==Firmware Versions== |
|||
Version 8.4.7.0 is IPv6 enabled |
|||
Revision as of 16:11, 6 December 2011
Billion BiPAC 7800N
Factory IP: 192.168.1.254 Factory User/Pass: admin/admin
Firmware
Latest Firmware is from Billion As of October 2011 the version we ship is 1.06d
Another useful Billion page on spaldwick.com
Comtrend
Info here: *Comtrend
Thomson
We've tested a TG789vn router (Aug 2011) which had beta IPv6 firmware (10.1.0.3), and this works. A bit more info here: [1]
Apple Airport Extreme
The Airport Extreme claims to support native IPv6 over PPPoE but we don't know of anyone who has it working. It still works via tunnels though (tunnel configuration explained on the knowledge base). You need to set the remote tunnel endpoint address to 81.187.81.6, and you need two /64 subnets off us that are statically routed to the Airport's IPv4 address. Assign an IP from one /64 as the WAN address and set the default route to our ping address "bottomless", which is 2001:8b0:0:81::51bb:51bb. Set the LAN address to the first usable IP on the second /64 and it should just work.
TG582N
Firmware Versions
Version 8.4.7.0 is IPv6 enabled