Stopping Open DNS - FireBrick 2700: Difference between revisions
mNo edit summary |
m (Change URL from clueless to control) |
||
| Line 7: | Line 7: | ||
Config -> Edit -> Setup -> General system services -> DNS service settings -> local-only |
Config -> Edit -> Setup -> General system services -> DNS service settings -> local-only |
||
*Then re-test from the Control Pages: https:// |
*Then re-test from the Control Pages: https://control.aa.net.uk/dnsresolvers.cgi |
||
[[File:Fb2700-dns.png|600px]] |
[[File:Fb2700-dns.png|600px]] |
||
Revision as of 19:44, 14 Ocak 2017
On a FireBrick 2700 the DNS service defaults to local-only - this prevents access to the FireBrick DNS resolver from the WAN by default.
The setting for this is found in the Web config editor at:
Config -> Edit -> Setup -> General system services -> DNS service settings -> local-only
- Then re-test from the Control Pages: https://control.aa.net.uk/dnsresolvers.cgi
Testing Access
The web interface of the FireBrick can list what services are open, go to
Diagnostics -> Access Check
Enter an Source IP of an IP on the Internet.
The FireBrick will then list all the services open to that IP address, e.g.:
DNS resolver access:- This address is not on a local Ethernet subnet and so not allowed access.