Domains:DNS Types: Difference between revisions

From AAISP Support Site
m (→‎Examples: clean up, typos fixed: eg: → e.g.:)
Line 74: Line 74:
[[File:Dns-error-1.png]] [[File:Dns-error-2.png]]
[[File:Dns-error-1.png]] [[File:Dns-error-2.png]]


==-TXT field too long, add quotes==
==Other DNS Pages==
Sometimes you may have an error if you try adding a record that is longer than 256 characters.
<ncl style=bullet maxdepth=1 headings=bullet headstart=2 showcats=1 showarts=1>Category:DNS</ncl>


In this case, split your record in to smaller sections and quote them inside speech marks.


[[Category:DNS]]
[[Category:DNS]]

Revision as of 08:47, 10 April 2017

Couk.png

Our control pages let you manage the DNS for your domains.

There are various type of DNS records that you can add

Dns-types.png
  • A (IP address)
  • A+reverse
  • CNAME
  • DNAME
  • MX 10
  • MX 20
  • MX 30
  • MX 40
  • MX 50
  • AAAA (IP6)
  • AAAA+reverse
  • PTR
  • LOC
  • FTP password
  • NS (Name server)
  • TXT
  • SRV
  • IAX2
  • H.323
  • SIP
  • DS


Notes on specific record types

A+Reverse, AAAA+Reverse

The A and AAAA reverse types are a special case, we use these to create PTR records automatically

FTP

The FTP Password is nothing to do with DNS, instead it sets the password on the domain if we are providing web services.


txt Records

txt records are a max of 255 characters in DNS. If you need to have longer than 255 characters, then on the control page you can quote separate sections, for example:

Value:   "part1" "part2" "part3"

This is useful for long txt records, such as DKIM data, for example:

e.g. Dns-txt.png

You can include a quote with: \"

SRV Records

The format of the 'host' part of a SRV record is:

_service._protocol.name

The format of the 'value' of an srv record would be in the format of:

priority weight port host 

More information on Wikipedia

Examples

The srv record relating to a Microsoft Exchange service
The srv record used for the AAISP SIP Service, pointing to two possible hosts

You can test your SRV record using 'dig' or 'nslookup' on the command line, e.g.:

$ dig +short srv _sip._udp.pbx.example.com
$ nslookup -type=srv _sip._udp.pbx.example.com

DNS Records with Errors

We will point out common problems and errors if invalid records are created. In this case, we'll highlight the record in red and will add a note with details.

Dns-error-1.png Dns-error-2.png

-TXT field too long, add quotes

Sometimes you may have an error if you try adding a record that is longer than 256 characters.

In this case, split your record in to smaller sections and quote them inside speech marks.