FireBrick 2700 Configuration: Difference between revisions
CrazyTeeka (talk | contribs) mNo edit summary |
CrazyTeeka (talk | contribs) |
||
(103 intermediate revisions by 3 users not shown) | |||
Line 5: | Line 5: | ||
These instructions are mostly applicable to the 2500 too. The difference between the 2700 and the 2500 is that: |
These instructions are mostly applicable to the 2500 too. The difference between the 2700 and the 2500 is that: |
||
*The 2700 has a USB port so supports 3G fallback, the 2500 does not have a USB port. |
*The 2700 has a USB port so supports 3G fallback, the 2500 does not have a USB port. |
||
*The 2700 has faster throughput - |
*The 2700 has faster throughput - 350Mbit/s on the 2700 compared to 100Mbit/s on the 2500. |
||
=Factory Default Config= |
=Factory Default Config= |
||
The factory default config of a FireBrick looks like this: |
The factory default config of a FireBrick looks like this: |
||
<syntaxhighlight> |
<syntaxhighlight lang=xml> |
||
<?xml version="1.0" encoding="UTF-8"?> |
<?xml version="1.0" encoding="UTF-8"?> |
||
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)"> |
|||
<config xmlns="http://firebrick.ltd.uk/xml/fb2700/" |
|||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
|||
xsi:schemaLocation="http://firebrick.ltd.uk/xml/fb2700/ http://firebrick.ltd.uk/download/FB2701/xml/fb2700/1.31.000.xsd" |
|||
patch="20687"> |
|||
<system contact="John Doe" log-panic="fb-support"/> |
<system contact="John Doe" log-panic="fb-support"/> |
||
<log name="default" comment="General logging for web viewing"/> |
<log name="default" comment="General logging for web viewing"/> |
||
Line 59: | Line 55: | ||
</syntaxhighlight> |
</syntaxhighlight> |
||
=Quick Start Config= |
|||
Here we have an example of the FireBrick using NAT: |
|||
=Config Run Through= |
|||
The FireBrick uses XML version 1.0 and UTF-8 encoding: |
|||
<syntaxhighlight> |
<syntaxhighlight lang=xml> |
||
<?xml version="1.0" encoding="UTF-8"?> |
<?xml version="1.0" encoding="UTF-8"?> |
||
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)"> |
|||
</syntaxhighlight> |
|||
<system contact="John Doe" log-panic="fb-support"/> |
|||
FireBrick is running factory release firmware 1.31.000 (Janus): |
|||
<user name="admin" password="secret" timeout="1:00:00"/> |
|||
<syntaxhighlight> |
|||
<log name="default" comment="General logging for web viewing"/> |
|||
<config xmlns="http://firebrick.ltd.uk/xml/fb2700/" |
|||
<log name="fb-support" comment="Log target for sending logs to FireBrick support team"> |
|||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
|||
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/> |
|||
xsi:schemaLocation="http://firebrick.ltd.uk/xml/fb2700/ http://firebrick.ltd.uk/download/FB2701/xml/fb2700/1.31.000.xsd" |
|||
</log> |
|||
patch="20687"> |
|||
<services> |
|||
<ntp ntpserver="time.aa.net.uk"/> |
|||
<telnet/> |
|||
<http/> |
|||
<dns resolvers="2001:8b0::2020 2001:8b0::2021 217.169.20.20 217.169.20.21"/> |
|||
</services> |
|||
<port name="LAN" ports="1 2 3"/> |
|||
<port name="WAN" ports="4"/> |
|||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
<subnet ip="2001:db8::1/64 10.0.0.1/24"/> |
|||
<dhcp name="DHCP" ip="10.0.0.2-254" lease="1:00:00"/> |
|||
</interface> |
|||
<interface name="WAN" port="WAN" ra-client="true"/> |
|||
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" graph="AAISP" log="default" nat="true"/> |
|||
<rule-set name="Firewall: LAN" target-interface="LAN" no-match-action="reject" comment="Default firewall rule for traffic to LAN"> |
|||
<rule name="Allow Firebrick" source-interface="self" comment="Allow all from the FireBrick to LAN"/> |
|||
</rule-set> |
|||
</config> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
and here the FireBrick is NAT free: |
|||
==System:== |
|||
FireBrick with basic system config. Automatic updates to new factory release firmware are enabled by default: |
|||
<syntaxhighlight> |
|||
<system contact="John Doe" log-panic="fb-support"/> |
|||
</syntaxhighlight> |
|||
Same as above but automatic firmware updates are disabled: |
|||
<syntaxhighlight> |
|||
<system contact="John Doe" log-panic="fb-support" sw-update="false"/> |
|||
</syntaxhighlight> |
|||
<syntaxhighlight lang=xml> |
|||
==User:== |
|||
<?xml version="1.0" encoding="UTF-8"?> |
|||
Admin account with password "secret". Login idle timeout is "5:00". Login level is "ADMIN". |
|||
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)"> |
|||
<syntaxhighlight> |
|||
<system contact="John Doe" log-panic="fb-support"/> |
|||
<user name="Admin" password="SHA1#D57E4F7EE70491BBD274B5F71185A2A577B0DAFBF558BD"/> |
|||
<user name="admin" password="secret" timeout="1:00:00"/> |
|||
</syntaxhighlight> |
|||
<log name="default" comment="General logging for web viewing"/> |
|||
Same as above but login idle timeout is disabled: |
|||
<log name="fb-support" comment="Log target for sending logs to FireBrick support team"> |
|||
<syntaxhighlight> |
|||
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/> |
|||
<user name="Admin" password="SHA1#D57E4F7EE70491BBD274B5F71185A2A577B0DAFBF558BD" timeout="0"/> |
|||
</log> |
|||
</syntaxhighlight> |
|||
<services> |
|||
Basic Guest/User account with many things hidden: |
|||
<ntp ntpserver="time.aa.net.uk"/> |
|||
<syntaxhighlight> |
|||
<telnet/> |
|||
<user name="Admin" password="SHA1#D57E4F7EE70491BBD274B5F71185A2A577B0DAFBF558BD" timeout="0" level="GUEST"/> |
|||
<http/> |
|||
</syntaxhighlight> |
|||
<dns resolvers="2001:8b0::2020 2001:8b0::2021 217.169.20.20 217.169.20.21"/> |
|||
or |
|||
</services> |
|||
<syntaxhighlight> |
|||
<port name="LAN" ports="1 2 3"/> |
|||
<user name="Admin" password="SHA1#D57E4F7EE70491BBD274B5F71185A2A577B0DAFBF558BD" timeout="0" level="USER"/> |
|||
<port name="WAN" ports="4"/> |
|||
</syntaxhighlight> |
|||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
Debug account with a few extra things unhidden: |
|||
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29"/> |
|||
<syntaxhighlight> |
|||
<dhcp name="DHCP" ip="217.169.11.114-118" lease="1:00:00"/> |
|||
<user name="Admin" password="SHA1#D57E4F7EE70491BBD274B5F71185A2A577B0DAFBF558BD" timeout="0" level="DEBUG"/> |
|||
</interface> |
|||
<interface name="WAN" port="WAN" ra-client="true"/> |
|||
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" graph="AAISP" log="default" nat="false"/> |
|||
<rule-set name="Firewall: LAN" target-interface="LAN" no-match-action="reject" comment="Default firewall rule for traffic to LAN"> |
|||
<rule name="Allow Firebrick" source-interface="self" comment="Allow all from the FireBrick to LAN"/> |
|||
</rule-set> |
|||
</config> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
=VoIP= |
|||
==Logging:== |
|||
General logging: |
|||
<syntaxhighlight> |
|||
<log name="default" comment="General logging for web viewing"/> |
|||
</syntaxhighlight> |
|||
Crash logs emailed to FireBrick support team, ties in with <system log-panic="fb-support"> as above: |
|||
<syntaxhighlight> |
|||
<log name="fb-support" comment="Log target for sending logs to FireBrick support team"> |
|||
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/> |
|||
</log> |
|||
</syntaxhighlight> |
|||
Here we have an example of setting up VoIP on the FireBrick, inbound and outbound calls, inbound URI calls, and outbound URI calls to AAISP: |
|||
==Services - NTP Client:== |
|||
Set time from AAISP time server, local-only by default: |
|||
<syntaxhighlight> |
|||
<ntp ntpserver="time.aa.net.uk"/> |
|||
</syntaxhighlight> |
|||
<syntaxhighlight lang=xml> |
|||
==Services - Telnet Server:== |
|||
<voip source-ip4="217.169.11.113" source-ip6="2001:8b0:119c:acf2::1"> |
|||
Enable telnet server, local-only by default: |
|||
<carrier name="AASIP+441234567890" allow="81.187.30.110-119 90.155.3.0/24 90.155.103.0/24 2001:8b0:0:30::5060:0/112 2001:8b0:5060::/48" |
|||
<syntaxhighlight> |
|||
registrar="voiceless.aa.net.uk" username="+441234567890" password="secret" extn="1000"/> |
|||
<telnet/> |
|||
<carrier name="URI" to="@domain.name" trust-cli="true" extn="1000"/> |
|||
<telephone name="John" display-name="John" username="John" password="secret" extn="1000" carrier="AASIP+441234567890"/> |
|||
<telephone name="AAISP-Sales" extn="400222" uri="sales@aa.net.uk"/> |
|||
<telephone name="AAISP-Accounts" extn="400666" uri="accounts@aa.net.uk"/> |
|||
<telephone name="AAISP-Support" extn="400999" uri="support@aa.net.uk"/> |
|||
</voip> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
and here we use Direct Dial In, extn= is removed from <carrier> element and ddi= added to <telephone> element: |
|||
==Services - HTTP Server:== |
|||
Enable HTTP server, local-only by default: |
|||
<syntaxhighlight> |
<syntaxhighlight lang=xml> |
||
<voip source-ip4="217.169.11.113" source-ip6="2001:8b0:119c:acf2::1"> |
|||
<http/> |
|||
<carrier name="AASIP+441234567890" allow="81.187.30.110-119 90.155.3.0/24 90.155.103.0/24 2001:8b0:0:30::5060:0/112 2001:8b0:5060::/48" |
|||
registrar="voiceless.aa.net.uk" username="+441234567890" password="secret"/> |
|||
<carrier name="URI" to="@domain.name" trust-cli="true" extn="1000"/> |
|||
<telephone name="John" display-name="John" username="John" password="secret" extn="1000" ddi="+441234567890" carrier="AASIP+441234567890"/> |
|||
<telephone name="AAISP-Sales" extn="400222" uri="sales@aa.net.uk"/> |
|||
<telephone name="AAISP-Accounts" extn="400666" uri="accounts@aa.net.uk"/> |
|||
<telephone name="AAISP-Support" extn="400999" uri="support@aa.net.uk"/> |
|||
</voip> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
=Remote Login= |
|||
==Services - DNS Service:== |
|||
Enable DNS service, local-only by default: |
|||
Here we allow limited IPv6 addresses access to Telnet and HTTP, this stops you locking yourself out, in the example below 2001:8b0:119c:acf2::2/64 is used but you will need to use your own IP address instead, it also allows AAISP staff to login: |
|||
<syntaxhighlight> |
|||
<dns resolvers="217.169.20.20 217.169.20.21 2001:8b0::2020 2001:8b0::2021"/> |
|||
<syntaxhighlight lang=xml> |
|||
<telnet allow="2001:8b0:119c:acf2::2/64 2001:8b0::/47" local-only="false"/> |
|||
<http allow="2001:8b0:119c:acf2::2/64 2001:8b0::/47" local-only="false"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
then add a user account for AAISP, don't forgot to change password to something else: |
|||
==Port Grouping and Naming:== |
|||
Port grouping for a single PPPoE session: |
|||
<syntaxhighlight> |
<syntaxhighlight lang=xml> |
||
< |
<user name="AAISP" password="secret" timeout="1:00:00"/> |
||
<port name="WAN" ports="4"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
Port grouping for dual PPPoE sessions: |
|||
=Two Lines with 3G Dongle - Bonded= |
|||
<syntaxhighlight> |
|||
Ports - LAN is on ports 1 and 2, WAN1 is on port 4, WAN2 is on port 3: |
|||
<syntaxhighlight lang=xml> |
|||
<port name="LAN" ports="1 2"/> |
<port name="LAN" ports="1 2"/> |
||
<port name="WAN2" ports="3"/> |
|||
<port name="WAN1" ports="4"/> |
|||
</syntaxhighlight> |
|||
Port grouping for triple PPPoE sessions: |
|||
<syntaxhighlight> |
|||
<port name="LAN" ports="1"/> |
|||
<port name="WAN3" ports="2"/> |
|||
<port name="WAN2" ports="3"/> |
<port name="WAN2" ports="3"/> |
||
<port name="WAN1" ports="4"/> |
<port name="WAN1" ports="4"/> |
||
</syntaxhighlight> |
</syntaxhighlight> |
||
Interface - LAN interface, with DHCP for IPv4 addresses and RA for IPv6 addresses, assumes PPP session is 1500 MTU, if PPP session is 1492 MTU then change 1472 to 1464 in second ra-mtu= element: |
|||
==Ethernet Interface:== |
|||
LAN Interface: |
|||
<syntaxhighlight> |
<syntaxhighlight lang=xml> |
||
<interface name="LAN" port="LAN" ra-client="false"> |
<interface name="LAN" port="LAN" ra-client="false"> |
||
<subnet ip="1. |
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1412" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Down"/> |
||
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1472" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Up"/> |
|||
<dhcp name="DHCP" ip="217.169.11.114-118" lease="1:00:00"/> |
|||
</interface> |
</interface> |
||
</syntaxhighlight> |
</syntaxhighlight> |
||
LAN Interface for IPv6 tunnel over 3G dongle with MTU 1500: |
|||
Interface - WAN interfaces, RA client is enabled: |
|||
<syntaxhighlight> |
|||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
<syntaxhighlight lang=xml> |
|||
<subnet ip="1.2.3.4/24 2001:8b0::1/64" ra="true" ra-mtu="1480" ra-dns="2001:8b0::2020 2001:8b0::2021"/> |
|||
< |
<interface name="WAN1" port="WAN1" ra-client="true"/> |
||
<interface name="WAN2" port="WAN2" ra-client="true"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
LAN Interface for IPv6 tunnel over 3G dongle with MTU 1492: |
|||
PPP - Connect to both lines, MTU is 1500, timeout is 5 seconds: |
|||
<syntaxhighlight> |
|||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
<syntaxhighlight lang=xml> |
|||
<subnet ip="1.2.3.4/24 2001:8b0::1/64" ra="true" ra-mtu="1472" ra-dns="2001:8b0::2020 2001:8b0::2021"/> |
|||
<ppp name="AAISP1" port="WAN1" username="me@a.1" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" graph="AAISP1" log="default" nat="false"/> |
|||
</interface> |
|||
<ppp name="AAISP2" port="WAN2" username="me@a.2" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" graph="AAISP2" log="default" nat="false"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
WAN Interface for a single PPPoE session: |
|||
Dongle - Connect over 3G: |
|||
<syntaxhighlight> |
|||
<interface name="WAN" port="WAN" ra-client="false"/> |
|||
<syntaxhighlight lang=xml> |
|||
<usb> |
|||
<dongle name="AAISP3" username="me@a.3" password="secret" nat="false" graph="AAISP3" log="default"/> |
|||
</usb> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
WAN Interface for dual PPPoE sessions: |
|||
Static Route - Brings up IPv6 default route using IPv4 tunnel when both lines are down or unplugged: |
|||
<syntaxhighlight> |
|||
<interface name="WAN1" port="WAN1" ra-client="false"/> |
|||
<syntaxhighlight lang=xml> |
|||
<interface name="WAN2" port="WAN2" ra-client="false"/> |
|||
<route ip="::/0" gateway="81.187.81.6" profile="DSL-Down" comment="IPv6 default route using IPv4 tunnel"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
WAN Interface for triple PPPoE sessions: |
|||
Profiles - Checks if both lines are up or down: |
|||
<syntaxhighlight> |
|||
<interface name="WAN1" port="WAN1" ra-client="false"/> |
|||
<syntaxhighlight lang=xml> |
|||
<interface name="WAN2" port="WAN2" ra-client="false"/> |
|||
<profile name="DSL-Down" interval="1" timeout="5" recover="1" ppp="AAISP1 AAISP2" invert="true" comment="DSL is Down"/> |
|||
<interface name="WAN3" port="WAN3" ra-client="false"/> |
|||
<profile name="DSL-Up" not="DSL-Down" comment="DSL is Up"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
=Two Lines with 3G Dongle - Fallover= |
|||
==PPPoE:== |
|||
Connect to AAISP over PPPoE session: |
|||
Ports - LAN is on ports 1 and 2, WAN1 is on port 4, WAN2 is on port 3: |
|||
<syntaxhighlight> |
|||
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" graph="AAISP" log="default"/> |
|||
< |
<syntaxhighlight lang=xml> |
||
<port name="LAN" ports="1 2"/> |
|||
Same as above with MTU 1500: |
|||
<port name="WAN2" ports="3"/> |
|||
<syntaxhighlight> |
|||
<port name="WAN1" ports="4"/> |
|||
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" mtu="1500" graph="AAISP" log="default"/> |
|||
</syntaxhighlight> |
|||
Same as above with MTU 1500 and 3G dongle tweaks: |
|||
<syntaxhighlight> |
|||
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" graph="AAISP" log="default"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
Interface - LAN interface, with DHCP for IPv4 addresses and RA for IPv6 addresses, assumes PPP session is 1500 MTU, if PPP session is 1492 MTU then change 1472 to 1464 in second ra-mtu= element: |
|||
==USB and 3G dongle:== |
|||
Connect to AAISP over 3G dongle with NAT: |
|||
<syntaxhighlight> |
<syntaxhighlight lang=xml> |
||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
<dongle name="AAISP-3G" username="me@a.2" password="secret" graph="AAISP-3G" log="default"/> |
|||
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1412" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Down"/> |
|||
</syntaxhighlight> |
|||
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1472" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Up"/> |
|||
Connect to AAISP over 3G dongle without NAT: |
|||
<dhcp name="DHCP" ip="217.169.11.114-118" lease="1:00:00"/> |
|||
<syntaxhighlight> |
|||
</interface> |
|||
<dongle name="AAISP-3G" username="me@a.2" password="secret" nat="false" graph="AAISP-3G" log="default"/> |
|||
</syntaxhighlight> |
|||
Connect to AAISP over 3G dongle with APN and NAT: |
|||
<syntaxhighlight> |
|||
<dongle name="AAISP-3G" apn="m2m.aql.net" username="me@a.2" password="secret" graph="AAISP-3G" log="default"/> |
|||
</syntaxhighlight> |
|||
Connect to AAISP over 3G dongle with APN and without NAT: |
|||
<syntaxhighlight> |
|||
<dongle name="AAISP-3G" apn="m2m.aql.net" username="me@a.2" password="secret" nat="false" graph="AAISP-3G" log="default"/> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
Interface - WAN interfaces, RA client is enabled: |
|||
<syntaxhighlight lang=xml> |
|||
=Complete Config Example= |
|||
<interface name="WAN1" port="WAN1" ra-client="true"/> |
|||
<syntaxhighlight> |
|||
<interface name="WAN2" port="WAN2" ra-client="true"/> |
|||
<?xml version="1.0" encoding="UTF-8"?> |
|||
</syntaxhighlight> |
|||
PPP - Connect to both lines, MTU is 1500, timeout is 5 seconds, localpref= gives priority to the highest value: |
|||
<config xmlns="http://firebrick.ltd.uk/xml/fb2700/" |
|||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
|||
xsi:schemaLocation="http://firebrick.ltd.uk/xml/fb2700/ http://firebrick.ltd.uk/download/FB2701/xml/fb2700/1.31.000.xsd" |
|||
patch="20687"> |
|||
<syntaxhighlight lang=xml> |
|||
<system contact="John Doe" log-panic="fb-support"/> |
|||
<ppp name="AAISP1" port="WAN1" username="me@a.1" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" localpref="1000" graph="AAISP1" log="default" nat="false"/> |
|||
<ppp name="AAISP2" port="WAN2" username="me@a.2" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" localpref="100" graph="AAISP2" log="default" nat="false"/> |
|||
</syntaxhighlight> |
|||
Dongle - Connect over 3G, localpref= gives this connection the lowest priority: |
|||
<user name="Admin" password="SHA1#D57E4F7EE70491BBD274B5F71185A2A577B0DAFBF558BD" timeout="0"/> |
|||
<syntaxhighlight lang=xml> |
|||
<log name="default" comment="General logging for web viewing"/> |
|||
<usb> |
|||
<dongle name="AAISP3" username="me@a.3" password="secret" nat="false" localpref="10" graph="AAISP3" log="default"/> |
|||
</usb> |
|||
</syntaxhighlight> |
|||
Static Route - Brings up IPv6 default route using IPv4 tunnel when both lines are down or unplugged: |
|||
<log name="fb-support" comment="Log target for sending logs to FireBrick support team"> |
|||
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/> |
|||
</log> |
|||
<syntaxhighlight lang=xml> |
|||
<services> |
|||
<route ip="::/0" gateway="81.187.81.6" profile="DSL-Down" comment="IPv6 default route using IPv4 tunnel"/> |
|||
<ntp ntpserver="time.aa.net.uk"/> |
|||
</syntaxhighlight> |
|||
<telnet/> |
|||
<http/> |
|||
<dns resolvers="217.169.20.20 217.169.20.21 2001:8b0::2020 2001:8b0::2021"/> |
|||
</services> |
|||
Profiles - Checks if both lines are up or down: |
|||
<port name="LAN" ports="1 2 3"/> |
|||
<port name="WAN" ports="4"/> |
|||
<syntaxhighlight lang=xml> |
|||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
<profile name="DSL-Down" interval="1" timeout="5" recover="1" ppp="AAISP1 AAISP2" invert="true" comment="DSL is Down"/> |
|||
<subnet ip="1.2.3.4/24 2001:8b0::1/64"/> |
|||
<profile name="DSL-Up" not="DSL-Down" comment="DSL is Up"/> |
|||
</interface> |
|||
</syntaxhighlight> |
|||
=L2TP Tunnel= |
|||
<interface name="WAN" port="WAN" ra-client="false"/> |
|||
L2TP tunnel with port 4 connected to another router: |
|||
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" graph="AAISP" log="default"/> |
|||
<syntaxhighlight lang=xml> |
|||
<usb> |
|||
<?xml version="1.0" encoding="UTF-8"?> |
|||
<dongle name="AAISP-3G" username="me@a.2" password="secret" graph="AAISP-3G" log="default"/> |
|||
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)"> |
|||
</usb> |
|||
<system contact="John Doe" log-panic="fb-support"/> |
|||
<user name="admin" password="secret" timeout="1:00:00"/> |
|||
<log name="default" comment="General logging for web viewing"/> |
|||
<log name="fb-support" comment="Log target for sending logs to FireBrick support team"> |
|||
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/> |
|||
</log> |
|||
<services> |
|||
<http/> |
|||
<dns resolvers="2001:8b0::2020 2001:8b0::2021 217.169.20.20 217.169.20.21"/> |
|||
<telnet/> |
|||
<time/> |
|||
</services> |
|||
<port name="LAN" ports="1 2 3"/> |
|||
<port name="WAN" ports="4"/> |
|||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
<subnet ip="2001:db8::1/64 10.0.0.1/24"/> |
|||
<dhcp name="DHCP" ip="10.0.0.2-254" lease="1:00:00"/> |
|||
</interface> |
|||
<interface name="WAN" port="WAN" ra-client="true" table="1"> |
|||
<subnet name="DHCP"/> |
|||
</interface> |
|||
<l2tp> |
|||
<outgoing name="AAISP" hostname="AAISP" server="90.155.53.19" graph="AAISP" table="1" payload-table="0" username="me@a.1" password="secret" min-retry="1" tcp-mss-fix="true"/> |
|||
</l2tp> |
|||
<rule-set name="Fallback: NAT" target-interface="nowhere" no-match-action="continue"> |
|||
<rule name="NAT" set-nat="true" set-table="1" action="accept"/> |
|||
</rule-set> |
|||
<rule-set name="Firewall: LAN" target-interface="LAN" no-match-action="reject" comment="Default firewall rule for traffic to LAN"> |
|||
<rule name="Allow Firebrick" source-interface="self" comment="Allow all from the FireBrick to LAN"/> |
|||
</rule-set> |
|||
</config> |
|||
</syntaxhighlight> |
</syntaxhighlight> |
||
[[Category:FireBrick|Configuration]] |
|||
[[Category:AA Routers]] |
Latest revision as of 05:14, 26 September 2019
This page describes editing the XML directly. The Firebrick does have a Web User Interface too. Both can be used to edit the config, as they edit the same underlying XML.
These instructions are mostly applicable to the 2500 too. The difference between the 2700 and the 2500 is that:
- The 2700 has a USB port so supports 3G fallback, the 2500 does not have a USB port.
- The 2700 has faster throughput - 350Mbit/s on the 2700 compared to 100Mbit/s on the 2500.
Factory Default Config
The factory default config of a FireBrick looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)">
<system contact="John Doe" log-panic="fb-support"/>
<log name="default" comment="General logging for web viewing"/>
<log name="fb-support" comment="Log target for sending logs to FireBrick support team">
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/>
</log>
<services>
<ntp/>
<telnet/>
<http local-only="true"/>
<dns>
<host name="my.firebrick.co.uk my.firebrick.uk"/>
</dns>
</services>
<port name="LAN1" ports="1"/>
<port name="LAN2" ports="2"/>
<port name="LAN3" ports="3"/>
<port name="WAN" ports="4"/>
<interface name="LAN1" port="LAN1" ra-client="false" comment="Default LAN interface">
<subnet name="Default IPs" ip="2001:db8::1/64 10.0.0.1/24" ra="false" nat="true" comment="Temporary IPs for setup only, delete when finished configuring"/>
<dhcp name="Auto allocated IPs" comment="Allocates IP addresses automatically"/>
</interface>
<interface name="LAN2" port="LAN2" ra-client="false" comment="Default LAN interface">
<subnet name="Default IPs" ip="2001:db8::1/64 10.0.0.1/24" ra="false" nat="true" comment="Temporary IPs for setup only, delete when finished configuring"/>
<dhcp name="Auto allocated IPs" comment="Allocates IP addresses automatically"/>
</interface>
<interface name="LAN3" port="LAN3" ra-client="false" comment="Default LAN interface">
<subnet name="Default IPs" ip="2001:db8::1/64 10.0.0.1/24" ra="false" nat="true" comment="Temporary IPs for setup only, delete when finished configuring"/>
<dhcp name="Auto allocated IPs" comment="Allocates IP addresses automatically"/>
</interface>
<interface name="WAN" port="WAN" ra-client="true" comment="Default WAN interface">
<subnet name="DHCP client" comment="Delete if not required, not needed if using PPP"/>
</interface>
<ppp name="LAN-PPPoE" port="LAN1" username="me@firebrick" password="password" nat="true"/>
<ppp name="WAN-PPPoE" port="WAN" username="me@firebrick" password="password" nat="true"/>
<usb>
<dongle name="Example-3G" comment="Default 3G config, does not usually require any more settings"/>
</usb>
<rule-set name="Firewall: LAN" target-interface="LAN1 LAN2 LAN3" no-match-action="reject" comment="Default firewall rule for traffic to LAN">
<rule name="Allow Firebrick" source-interface="self" comment="Allow all from the FireBrick to LAN"/>
</rule-set>
</config>
Quick Start Config
Here we have an example of the FireBrick using NAT:
<?xml version="1.0" encoding="UTF-8"?>
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)">
<system contact="John Doe" log-panic="fb-support"/>
<user name="admin" password="secret" timeout="1:00:00"/>
<log name="default" comment="General logging for web viewing"/>
<log name="fb-support" comment="Log target for sending logs to FireBrick support team">
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/>
</log>
<services>
<ntp ntpserver="time.aa.net.uk"/>
<telnet/>
<http/>
<dns resolvers="2001:8b0::2020 2001:8b0::2021 217.169.20.20 217.169.20.21"/>
</services>
<port name="LAN" ports="1 2 3"/>
<port name="WAN" ports="4"/>
<interface name="LAN" port="LAN" ra-client="false">
<subnet ip="2001:db8::1/64 10.0.0.1/24"/>
<dhcp name="DHCP" ip="10.0.0.2-254" lease="1:00:00"/>
</interface>
<interface name="WAN" port="WAN" ra-client="true"/>
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" graph="AAISP" log="default" nat="true"/>
<rule-set name="Firewall: LAN" target-interface="LAN" no-match-action="reject" comment="Default firewall rule for traffic to LAN">
<rule name="Allow Firebrick" source-interface="self" comment="Allow all from the FireBrick to LAN"/>
</rule-set>
</config>
and here the FireBrick is NAT free:
<?xml version="1.0" encoding="UTF-8"?>
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)">
<system contact="John Doe" log-panic="fb-support"/>
<user name="admin" password="secret" timeout="1:00:00"/>
<log name="default" comment="General logging for web viewing"/>
<log name="fb-support" comment="Log target for sending logs to FireBrick support team">
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/>
</log>
<services>
<ntp ntpserver="time.aa.net.uk"/>
<telnet/>
<http/>
<dns resolvers="2001:8b0::2020 2001:8b0::2021 217.169.20.20 217.169.20.21"/>
</services>
<port name="LAN" ports="1 2 3"/>
<port name="WAN" ports="4"/>
<interface name="LAN" port="LAN" ra-client="false">
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29"/>
<dhcp name="DHCP" ip="217.169.11.114-118" lease="1:00:00"/>
</interface>
<interface name="WAN" port="WAN" ra-client="true"/>
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" graph="AAISP" log="default" nat="false"/>
<rule-set name="Firewall: LAN" target-interface="LAN" no-match-action="reject" comment="Default firewall rule for traffic to LAN">
<rule name="Allow Firebrick" source-interface="self" comment="Allow all from the FireBrick to LAN"/>
</rule-set>
</config>
VoIP
Here we have an example of setting up VoIP on the FireBrick, inbound and outbound calls, inbound URI calls, and outbound URI calls to AAISP:
<voip source-ip4="217.169.11.113" source-ip6="2001:8b0:119c:acf2::1">
<carrier name="AASIP+441234567890" allow="81.187.30.110-119 90.155.3.0/24 90.155.103.0/24 2001:8b0:0:30::5060:0/112 2001:8b0:5060::/48"
registrar="voiceless.aa.net.uk" username="+441234567890" password="secret" extn="1000"/>
<carrier name="URI" to="@domain.name" trust-cli="true" extn="1000"/>
<telephone name="John" display-name="John" username="John" password="secret" extn="1000" carrier="AASIP+441234567890"/>
<telephone name="AAISP-Sales" extn="400222" uri="sales@aa.net.uk"/>
<telephone name="AAISP-Accounts" extn="400666" uri="accounts@aa.net.uk"/>
<telephone name="AAISP-Support" extn="400999" uri="support@aa.net.uk"/>
</voip>
and here we use Direct Dial In, extn= is removed from <carrier> element and ddi= added to <telephone> element:
<voip source-ip4="217.169.11.113" source-ip6="2001:8b0:119c:acf2::1">
<carrier name="AASIP+441234567890" allow="81.187.30.110-119 90.155.3.0/24 90.155.103.0/24 2001:8b0:0:30::5060:0/112 2001:8b0:5060::/48"
registrar="voiceless.aa.net.uk" username="+441234567890" password="secret"/>
<carrier name="URI" to="@domain.name" trust-cli="true" extn="1000"/>
<telephone name="John" display-name="John" username="John" password="secret" extn="1000" ddi="+441234567890" carrier="AASIP+441234567890"/>
<telephone name="AAISP-Sales" extn="400222" uri="sales@aa.net.uk"/>
<telephone name="AAISP-Accounts" extn="400666" uri="accounts@aa.net.uk"/>
<telephone name="AAISP-Support" extn="400999" uri="support@aa.net.uk"/>
</voip>
Remote Login
Here we allow limited IPv6 addresses access to Telnet and HTTP, this stops you locking yourself out, in the example below 2001:8b0:119c:acf2::2/64 is used but you will need to use your own IP address instead, it also allows AAISP staff to login:
<telnet allow="2001:8b0:119c:acf2::2/64 2001:8b0::/47" local-only="false"/>
<http allow="2001:8b0:119c:acf2::2/64 2001:8b0::/47" local-only="false"/>
then add a user account for AAISP, don't forgot to change password to something else:
<user name="AAISP" password="secret" timeout="1:00:00"/>
Two Lines with 3G Dongle - Bonded
Ports - LAN is on ports 1 and 2, WAN1 is on port 4, WAN2 is on port 3:
<port name="LAN" ports="1 2"/>
<port name="WAN2" ports="3"/>
<port name="WAN1" ports="4"/>
Interface - LAN interface, with DHCP for IPv4 addresses and RA for IPv6 addresses, assumes PPP session is 1500 MTU, if PPP session is 1492 MTU then change 1472 to 1464 in second ra-mtu= element:
<interface name="LAN" port="LAN" ra-client="false">
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1412" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Down"/>
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1472" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Up"/>
<dhcp name="DHCP" ip="217.169.11.114-118" lease="1:00:00"/>
</interface>
Interface - WAN interfaces, RA client is enabled:
<interface name="WAN1" port="WAN1" ra-client="true"/>
<interface name="WAN2" port="WAN2" ra-client="true"/>
PPP - Connect to both lines, MTU is 1500, timeout is 5 seconds:
<ppp name="AAISP1" port="WAN1" username="me@a.1" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" graph="AAISP1" log="default" nat="false"/>
<ppp name="AAISP2" port="WAN2" username="me@a.2" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" graph="AAISP2" log="default" nat="false"/>
Dongle - Connect over 3G:
<usb>
<dongle name="AAISP3" username="me@a.3" password="secret" nat="false" graph="AAISP3" log="default"/>
</usb>
Static Route - Brings up IPv6 default route using IPv4 tunnel when both lines are down or unplugged:
<route ip="::/0" gateway="81.187.81.6" profile="DSL-Down" comment="IPv6 default route using IPv4 tunnel"/>
Profiles - Checks if both lines are up or down:
<profile name="DSL-Down" interval="1" timeout="5" recover="1" ppp="AAISP1 AAISP2" invert="true" comment="DSL is Down"/>
<profile name="DSL-Up" not="DSL-Down" comment="DSL is Up"/>
Two Lines with 3G Dongle - Fallover
Ports - LAN is on ports 1 and 2, WAN1 is on port 4, WAN2 is on port 3:
<port name="LAN" ports="1 2"/>
<port name="WAN2" ports="3"/>
<port name="WAN1" ports="4"/>
Interface - LAN interface, with DHCP for IPv4 addresses and RA for IPv6 addresses, assumes PPP session is 1500 MTU, if PPP session is 1492 MTU then change 1472 to 1464 in second ra-mtu= element:
<interface name="LAN" port="LAN" ra-client="false">
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1412" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Down"/>
<subnet ip="2001:8b0:119c:acf2::1/64 217.169.11.113/29" ra="true" ra-mtu="1472" ra-dns="2001:8b0::2020 2001:8b0::2021" profile="DSL-Up"/>
<dhcp name="DHCP" ip="217.169.11.114-118" lease="1:00:00"/>
</interface>
Interface - WAN interfaces, RA client is enabled:
<interface name="WAN1" port="WAN1" ra-client="true"/>
<interface name="WAN2" port="WAN2" ra-client="true"/>
PPP - Connect to both lines, MTU is 1500, timeout is 5 seconds, localpref= gives priority to the highest value:
<ppp name="AAISP1" port="WAN1" username="me@a.1" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" localpref="1000" graph="AAISP1" log="default" nat="false"/>
<ppp name="AAISP2" port="WAN2" username="me@a.2" password="secret" mtu="1500" lcp-rate="1" lcp-timeout="5" localpref="100" graph="AAISP2" log="default" nat="false"/>
Dongle - Connect over 3G, localpref= gives this connection the lowest priority:
<usb>
<dongle name="AAISP3" username="me@a.3" password="secret" nat="false" localpref="10" graph="AAISP3" log="default"/>
</usb>
Static Route - Brings up IPv6 default route using IPv4 tunnel when both lines are down or unplugged:
<route ip="::/0" gateway="81.187.81.6" profile="DSL-Down" comment="IPv6 default route using IPv4 tunnel"/>
Profiles - Checks if both lines are up or down:
<profile name="DSL-Down" interval="1" timeout="5" recover="1" ppp="AAISP1 AAISP2" invert="true" comment="DSL is Down"/>
<profile name="DSL-Up" not="DSL-Down" comment="DSL is Up"/>
L2TP Tunnel
L2TP tunnel with port 4 connected to another router:
<?xml version="1.0" encoding="UTF-8"?>
<config serial="0000-0000-0000" version="FB2700 Flint (V1.53.000)">
<system contact="John Doe" log-panic="fb-support"/>
<user name="admin" password="secret" timeout="1:00:00"/>
<log name="default" comment="General logging for web viewing"/>
<log name="fb-support" comment="Log target for sending logs to FireBrick support team">
<email to="crashlog@firebrick.ltd.uk" delay="10" comment="Crash logs emailed to FireBrick support team"/>
</log>
<services>
<http/>
<dns resolvers="2001:8b0::2020 2001:8b0::2021 217.169.20.20 217.169.20.21"/>
<telnet/>
<time/>
</services>
<port name="LAN" ports="1 2 3"/>
<port name="WAN" ports="4"/>
<interface name="LAN" port="LAN" ra-client="false">
<subnet ip="2001:db8::1/64 10.0.0.1/24"/>
<dhcp name="DHCP" ip="10.0.0.2-254" lease="1:00:00"/>
</interface>
<interface name="WAN" port="WAN" ra-client="true" table="1">
<subnet name="DHCP"/>
</interface>
<l2tp>
<outgoing name="AAISP" hostname="AAISP" server="90.155.53.19" graph="AAISP" table="1" payload-table="0" username="me@a.1" password="secret" min-retry="1" tcp-mss-fix="true"/>
</l2tp>
<rule-set name="Fallback: NAT" target-interface="nowhere" no-match-action="continue">
<rule name="NAT" set-nat="true" set-table="1" action="accept"/>
</rule-set>
<rule-set name="Firewall: LAN" target-interface="LAN" no-match-action="reject" comment="Default firewall rule for traffic to LAN">
<rule name="Allow Firebrick" source-interface="self" comment="Allow all from the FireBrick to LAN"/>
</rule-set>
</config>