SNOM Firmware Updates: Difference between revisions

Latest revision as of 16:38, 7 December 2021

The firmware on SNOM phones can easily be updated. This page covers how to upgrade a Snom phone and also has information about Security Updates that have been released by Snom.

How to upgrade a SNOM phone

These instructions are for how to update your phone to the latest firmware that Snom have published. (do check for security updates above, as there may well be newer firmware available.)

You can go to https://service.snom.com/ and look in the "LATEST FIRMWARE RELEASES" section. We have some notes below, but generally following Snom's 'Firmware Wizard' will be best.
See: SNOM Find IP Address if you're unsure how to access the web interface of your Snom.

Upgrading to the latest version

You can use these notes to upgrade to the latest version that Snom have on their wiki. (Do check for any Security updates that may be newer than the versions listed on their firmware pages).

Snoms instructions are found at their service hub.

Go to the Snom Firmware page: https://service.snom.com/display/wiki/Firmware+Update+Center
Click on the "Latest Release" under the Device type that you have.
Scroll down to the Downloads section.
Right click on the firmware for the phone and click 'Copy Shortcut'/'Copy Link', as shown in the image below:

List of Firmware on the Snom Wiki page
Log in to your Snom phone's web interface (see: SNOM Find IP Address if you're unsure how to access the web interface). The phone should ask you for a user name and password. If the phone was originally configured by AAISP then we may have a note of the password.
Click on the 'Software Update' link in the left menu, as in the image below:

Update menu on the Snom
Paste the link in to the Firmware field and click 'Load'.

Firmware form on the Snom web interface
The file will be loaded and the phone will reboot.

The Snom wiki pages do give a bit more detail than these points above, so if you get stuck then please to read the Snom pages.

End of Life

These phones from Snom are end of life and probably won't have any new Firmware:

1xx series
300, 320, 360, 370
821, 870

A full list can be found at Snom product lifecycle, which states:

As a general rule, the End of Life phase starts 2 years after the End of Sale declaration.

@@ Line 2: / Line 2: @@
 The firmware on SNOM phones can easily be updated. This page covers how to upgrade a Snom phone and also has information about Security Updates that have been released by Snom.
-==Security Update:- February 2015==
-Snom have released a security update for their phones. They have information about this on their wiki: http://wiki.snom.com/8.7.5.15_OpenVPN_Security_Update All Snoms listed on that page should be upgraded, here are notes on upgrading your phone:
-'''1.''' Go Snom's Special Security Update page: http://wiki.snom.com/8.7.5.15_OpenVPN_Security_Update
-'''2.''' Right click on the firmware for your phone model and click 'Copy Shortcut' or 'Copy Link', as in the image below:
-[[File:Snom-firmware-security.png|none|frame|Firmware list on Snom's Security Update page]]
-'''3.''' Log in to your Snom phone's web interface  (see: [[SNOM Find IP Address]] if you're unsure how to access the web interface). The phone should ask you for a user name and password. If the phone was originally configured by AAISP then we may have a note of the password.
-'''4.''' Click on the 'Software Update' link in the left menu.
-[[File:Snom-software-update.png|none|frame]]
-'''5.''' Paste the link in to the Firmware field and click 'Load', as in the image below:
-[[File:Snom-firmware-form.png|none|frame|Firmware form on the Snom web interface]]
-'''6.''' The file will be loaded and the phone will reboot, it may ask to press Tick before it reboots.
-----
 ==How to upgrade a SNOM phone==
-These instructions are for how to update your phone to the latest firmware that Snom have published. (do check for security updates above, as there may well be newer firmware available.
+These instructions are for how to update your phone to the latest firmware that Snom have published. (do check for security updates above, as there may well be newer firmware available.)
-*You can go to http://wiki.snom.com/Firmware and follow the 'Firmware Wizard' through. We have [[#Upgrading_to_the_latest_version_8|some notes below]], but generally following Snom's 'Firmware Wizard' will be best.
+* You can go to https://service.snom.com/ and look in the "LATEST FIRMWARE RELEASES" section. We have [[#Upgrading to the latest version|some notes below]], but generally following Snom's 'Firmware Wizard' will be best.
-*See: [[SNOM Find IP Address]] if you're unsure how to access the web interface of your Snom.
+* See: [[SNOM Find IP Address]] if you're unsure how to access the web interface of your Snom.
-==Upgrading to the latest version 8==
-You can use these notes to upgrade to the latest version that Snom have on their wiki. (Do check for any Security updates that may be newer than the versions listed on their firmware pages)
+==Upgrading to the latest version==
-'''1.''' Go to the Snom Version 8 page: http://wiki.snom.com/Firmware/V8
+You can use these notes to upgrade to the latest version that Snom have on their wiki. (Do check for any Security updates that may be newer than the versions listed on their firmware pages).
+Snoms instructions are found at their [https://service.snom.com/display/wiki/How+to+update+your++firmware+manually service hub].
-'''2''' Click on the Phone that you have
+# Go to the Snom Firmware page: https://service.snom.com/display/wiki/Firmware+Update+Center
-'''3''' Click on the Manual Update to V8.xxx
+# Click on the "Latest Release" under the Device type that you have.
+# Scroll down to the Downloads section.
-'''4.''' Right click on the firmware for the phone and click 'Copy Shortcut', as shown in the image below:
+# Right click on the firmware for the phone and click 'Copy Shortcut'/'Copy Link', as shown in the image below:
-[[File:Snom-firmware.png|none|frame|List of Firmware on the Snom Wiki page]]
+#:[[File:Snom-firmware.png|none|frame|List of Firmware on the Snom Wiki page]]
+# Log in to your Snom phone's web interface  (see: [[SNOM Find IP Address]] if you're unsure how to access the web interface). The phone should ask you for a user name and password. If the phone was originally configured by AAISP then we may have a note of the password.
-'''5.''' Log in to your Snom phone's web interface and navigate to Firmware Update
+# Click on the 'Software Update' link in the left menu, as in the image below:
-[[File:Snom-firmware-form.png|none|frame|Firmware form on the Snom web interface]]
+#:[[File:Snom-software-update.png|none|frame|Update menu on the Snom]]
-'''6.''' Paste the link in to the Firmware field and click 'Load'
+# Paste the link in to the Firmware field and click 'Load'.
+#:[[File:Snom-firmware-form.png|none|frame|Firmware form on the Snom web interface]]
-'''7.''' The file will be loaded and the phone will reboot.
+# The file will be loaded and the phone will reboot.
 The Snom wiki pages do give a bit more detail than these points above, so if you get stuck then please to read the Snom pages.
@@ Line 53: / Line 31: @@
 ==End of Life==
 These phones from Snom are end of life and probably won't have any new Firmware:
-*1xx series
+* 1xx series
-*360, 370
+* 300, 320, 360, 370
-*821, 870
+* 821, 870
-(There may well be others that are not listed here)
+A full list can be found at [https://service.snom.com/display/wiki/Snom+products+lifecycle Snom product lifecycle], which states: <blockquote>As a general rule, the End of Life phase starts 2 years after the End of Sale declaration.</blockquote>
-[[Category:VoIP]]
+[[Category:VoIP Phones|Snom]]
-[[Category:VoIP Phones]]