DGA0122 CLI: Difference between revisions

DGA0122 CLI (view source)

276 bytes added , 24 December 2023

m

Reference OpenWrt

editor

471

edits

Revision as of 21:38, 9 June 2023 (view source) Adsb (talk \| contribs) (Page creation)		Latest revision as of 16:50, 24 December 2023 (view source) Adsb (talk \| contribs) m (Reference OpenWrt)
(One intermediate revision by the same user not shown)
[[Category:Technicolor_DGA4134]] This probably applies to most Technicolor routers of the same era. There is a command line interface, which can be accessed from the LAN with ssh using the ''engineer'' username and the admin password. The CLI is fairly ~~minimal~~unfriendly, there is no manual. ~~:-(~~ The router's Itfirmware is ~~possible~~a tocustomised ~~mess~~version upof ~~the~~[https://openwrt.org ~~router~~OpenWrt], ~~configuration~~that inproject's ~~many~~documentation ~~ways~~may ifhelp ~~you~~(the ~~don~~'t''get''' and '''set''' commands are very ~~know~~like ~~what~~that ~~you~~project'res ~~doing!~~UCI). It is possible to mess up the router configuration in many ways if you don't know what you're doing! N.B. If you choose to play with the CLI, the '''rtfd''' command will reset the router to factory default setting, without any warning or Y/N prompt. The changes are applied after a reboot. Similarly the OpenWRT config variables are accessed from get uci. Don't expect much sympathy from AAISP staff when you've badly reconfigured your router.