12,290
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
No edit summary |
mNo edit summary |
||
(One intermediate revision by the same user not shown) | |||
OK --> Call Features (orange) --> Do Not Disturb
==Factory reset the Yealink DECT Base Station==▼
=Registering an additional Handset=▼
# Power up handset▼
# Press the button under 'Reg'▼
# Hold the button on the Base for 3 seconds▼
# Handset should then initialise▼
# Go to the Base station UI and set up the new account:▼
# Account - Number Assignment - or set up a new account:▼
## Account - Set Account2 --> Fill in details▼
## Account - Handset name --> Set the name▼
If you have lost the password you will have to factory reset the base station, and the default username and password will then work, and you'll need to configure the unit again.
There are a few ways to factory reset the Yealink base station:
===From web ui===
If you know the password!
Settings -> Upgrade --> Reset
# Wait a further 5 minutes
# Then, reboot the base station by unplugging it from power and plugging it back in
▲=Registering an additional Handset=
▲# Power up handset
▲# Press the button under 'Reg'
▲# Hold the button on the Base for 3 seconds
▲# Handset should then initialise
▲# Go to the Base station UI and set up the new account:
▲# Account - Number Assignment - or set up a new account:
▲## Account - Set Account2 --> Fill in details
▲## Account - Handset name --> Set the name
|
edits