IPv6 Configuration: Difference between revisions
| Line 19: | Line 19: | ||
*[[Cisco IPv6 Tunnel Config]] |
*[[Cisco IPv6 Tunnel Config]] |
||
*[[FreeBSD IPv6 Tunnel Config]] |
*[[FreeBSD IPv6 Tunnel Config]] |
||
*[[FireBrick 2700 v6 Tunnel]] |
|||
See also the configuration examples on the IPv6 Knowledge-base page referenced above. |
See also the configuration examples on the IPv6 Knowledge-base page referenced above. |
||
Revision as of 09:47, 10 Ocak 2011
Related Pages on the A&A Website:
Useful Blog/HOWTO Entries
Consumer CPE Equipment
The following equipment has been successfully used as an IPv6 Router for home use
- Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
- Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
IPv6 over IP Tunnelled Connections
See also the configuration examples on the IPv6 Knowledge-base page referenced above.
FireBrick 2500/2700
It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is:
- An IPv6 address on the LAN subnet
- ra="true" in the subnet