Stopping Open DNS - FireBrick 2700: Difference between revisions
No edit summary |
|||
| Line 11: | Line 11: | ||
The web interface of the FireBrick can list what services are open, go to |
The web interface of the FireBrick can list what services are open, go to |
||
Diagnostics - Access Check |
Diagnostics -> Access Check |
||
Enter an Source IP of an IP on the Internet. |
Enter an Source IP of an IP on the Internet. |
||
Revision as of 12:06, 18 Haziran 2013
On a FireBrick 2700 the DNS service defaults to local-only - this prevents access to the FireBrick DNS resolver from the WAN by default.
The setting for this is found
Config -> Edit -> Setup -> General system services -> DNS service settings -> local-only
Testing Access
The web interface of the FireBrick can list what services are open, go to
Diagnostics -> Access Check
Enter an Source IP of an IP on the Internet.
The FireBrick will then list all the services open to that IP address, eg:
DNS resolver access:- This address is not on a local Ethernet subnet and so not allowed access.