What is an Open DNS Resolver?

Every day, all the time we all use DNS to look up names and IPs on the Internet - ie, when you put bbc.co.uk in your browser, your computer needs to look up the IP address of the BBC's web server. To do this it will use DNS. The DNS server will respond back to your computer with the information.

AAISP customers normally use the AAISP DNS servers, or often their own router.

It is quite common for DSL routers to respond to these DNS requests on the WAN side as well as the LAN - this means that other people on the Internet can use your router to do their DNS look ups. It also means that 'attackers' can take advantage of this and use your router to attack someone else. This will use up bandwidth on your line.

The 'attack' in this sense is more about attacking somebody else on the Internet by using your DNS resolver. What happens, is that an attacker sends a DNS request to your router from a spoofed IP address. This spoofed IP address is the IP that the attacker wants to target, the victim. Your router then replies to the spoofed IP address with the DNS result. The DNS reply is larger in size to the request, and thus this is an 'amplification' attack. On its own one router won't make a difference, but when the same amplification attack is applied to many routers the aggregate reply traffic can become quite disruptive to the victim!

DNS Amplification Attack Diagrams
Single attack to a victim	By using multiple open servers, the attacker can bring the victim down by flooding it with traffic.

In the past having an open resolver on a router wasn't a problem, and there are many many routers which leave DNS open in their default state, however, this has been exploited and so it is best to disable this feature on routers.

This is often referred to as 'DNS Amplification Attacks'.

What if I run a DNS server on purpose?

It is quite legitimate for people to run DNS servers on their Network - in these cases access to them should be restricted or limited.

If you run an Authoritative DNS server, configure it only to return records for your domain.

If you run a Caching resolver, configure it to only return records for your users (firewall to only allow your users).

How to prevent this?

In short, a router with DNS open on the WAN side should have it's DNS service disabled or fire-walled. (port 53 to the Router should be blocked)

See the pages below for details on specific routers

Testing for Open Resolvers

The AAISP control pages can list your IPs that have an Open DNS server running, and can also re-scan your IP blocks (IPv4).

Log in to the Control Pages, and then either click on one of your IPv4 addresses or a broadband line. On these pages you'll see a link to the Open DNS page.