Status Tests: Difference between revisions
(Created page with " ==BT Sync Status Test== *Available on BT ADSL lines This will report back the current sync status of the line, including error counts. This is non-intrusive and should not ca...") |
mNo edit summary |
||
| Line 1: | Line 1: | ||
==BT Sync Status Test== |
==BT Sync Status Test== |
||
*Available on BT ADSL lines |
*Available on BT ADSL lines |
||
| Line 12: | Line 11: | ||
==FTTC |
==FTTC 'End to End' Tests== |
||
*Available on BT FTTC/FTTP lines. |
|||
This will run FTTC/FTTP specific tests and will suggest if it finds a fault or not. |
|||
Example result: |
|||
BT Test E2E Access Test/DCN:Inconclusive OR test pass. Unable to find the fault. |
|||
Down:40.0 (39.9/39.7/39.9) Up:10.0 (10.0/10.0/10.0) |
|||
NA 0.128M-40M Downstream, Interleaving Off - 0.128M-10M Upstream, Interleaving Off |
|||
In Sync Pass:GTC_FTTC_SERVICE_0000 GEA service test completed and no fault found . |
|||
If the test says |
|||
Down:40.0 (//) Up:10.0 (//) |
|||
...Then the line is probably not in sync (no sync figures given) |
|||
[[Category:Line Tests]] |
|||
Revision as of 10:17, 25 February 2015
BT Sync Status Test
- Available on BT ADSL lines
This will report back the current sync status of the line, including error counts. This is non-intrusive and should not cause the line to drop.
Example output:
BT Test xDSL Status Check:Pass Standalone sub test passed successfully.Pass OK. Circuit In Sync BRAS=5779kbit/s FTR=6502kbit/s MSR=8128kbit/s ServOpt=1 I/L=A Up Sync=854kbit/s LoopLoss=22.6 dB SNR=17.5 dB ErrSec=0 HECErr=0 Cells=1677609 Down Sync=6551kbit/s LoopLoss=40.8 dB SNR=13.5 dB ErrSec=0 HECErr=N/A Cells=4001712
This shows the line is In Sync, with a Up sync of 854Kb/s, and down od 6.551Kb/s
FTTC 'End to End' Tests
- Available on BT FTTC/FTTP lines.
This will run FTTC/FTTP specific tests and will suggest if it finds a fault or not.
Example result:
BT Test E2E Access Test/DCN:Inconclusive OR test pass. Unable to find the fault. Down:40.0 (39.9/39.7/39.9) Up:10.0 (10.0/10.0/10.0) NA 0.128M-40M Downstream, Interleaving Off - 0.128M-10M Upstream, Interleaving Off In Sync Pass:GTC_FTTC_SERVICE_0000 GEA service test completed and no fault found .
If the test says
Down:40.0 (//) Up:10.0 (//)
...Then the line is probably not in sync (no sync figures given)