VMG1312-B10A: AAISP Configuration: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 31: | Line 31: | ||
| Add a Firewall rule to allow ICMPv6 || ||2015-06-16 |
| Add a Firewall rule to allow ICMPv6 || ||2015-06-16 |
||
|- |
|- |
||
| Disable NAT || if customer has a public IP block |
| Disable NAT || if customer has a public IP block || 2015-02-01 |
||
|- |
|- |
||
| Disable SNMP || || 2015-02-01 |
| Disable SNMP || || 2015-02-01 |
||
Revision as of 09:22, 17 Haziran 2015
AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.
Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.
Here is an overview of the settings that are modified from the default, you can sort the table by the date added column to see any new changes.
| Setting | Note | Date added |
|---|---|---|
| Configure WAN interface | (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) | 2015-02-01 |
| Configure PPP | settings as per the service | 2015-02-01 |
| Configure DHCP | (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) | 2015-02-01 |
| Configure LAN subnet | if line has a block of public IPs. (else default is 192.168.1.1) | 2015-02-01 |
| Configure WiFi | Further Settings on Control Pages: SSID, Password or disable WiFi | 2015-02-01 |
| Configure WiFi for 20Mhz | instead of the 40Mhz default see VMG1312: WiFi Tips | 2015-02-01 |
| Configure WiFi for AES only | not legacy TKIP | 2015-06-16 |
| Configure Firewall on/off | (Settings on Control Pages, Default=Enabled) | 2015-02-01 |
| Configure TR-069 | so the router can be managed by AAISP (we give customer the same controls as staff get) | 2015-02-01 |
| Configure Local logging | (on router) to log: System, PPPoE, XDSL, Internet, Attack, Account. | 2015-05-29 |
| Add a Firewall rule to allow ICMPv6 | 2015-06-16 | |
| Disable NAT | if customer has a public IP block | 2015-02-01 |
| Disable SNMP | 2015-02-01 | |
| Disable 3G backup | 2015-02-01 | |
| Disable 'DoS Protection Blocking' | as it does odd things, like blocking WebUI over WiFi | 2015-06-16 |
| Change NTP servers | to be time.aa.net.uk and 0.uk.pool.ntp.org | 2015-02-01 |
| Change 'supervisor' password | Setting on Control Pages | 2015-02-01 |
| Change 'admin' password | Setting on Control Pages | 2015-02-01 |
| Change Remote Management Options | Further Settings on Control Pages | 2015-02-01 |
| Change QoS | to give upstream priority based on 'Packet Length' See: VMG1312: QoS | 2015-02-01 |
| Change 'Deny Ping Response' to Disable, | to allow the router to reply to ping. | 2015-02-01 |
| Disable the default QoS Classes | (See: VMG1312: QoS) | 2015-02-01 |
| Remove the default read-only zyuser user | 2015-02-01 |
- Static routes are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.
This list may not be exhaustive, and may change over time.