VMG1312-B10A: AAISP Configuration

AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.

Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.

Here is an overview of the settings that are modified from the default, you can sort the table by the date added column to see any new changes.

Area	Setting	Note	Date added
WAN	Configure WAN interface	(Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP))	2015-02-01
WAN	Configure PPP	settings as per the service	2015-02-01
LAN	Configure DHCP	(Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages)	2015-02-01
LAN	Configure LAN subnet	if line has a block of public IPs. (else default is 192.168.1.1)	2015-02-01
WiFi	Configure WiFi	Further Settings on Control Pages: SSID, Password or disable WiFi	2015-02-01
WiFi	Configure WiFi for 20Mhz	instead of the 40Mhz default see VMG1312: WiFi Tips	2015-02-01
WiFi	Configure WiFi for AES only	This disables legacy/insecure TKIP see VMG1312: WiFi Tips	2015-06-16
Firewall	Configure Firewall on/off	Settings on Control Pages, Default=Enabled	2015-02-01
TR-069	Configure TR-069	so the router can be managed by AAISP, we give customer the same controls as staff get	2015-02-01
Log	Configure Local logging	to log: System, PPPoE, XDSL, Internet, Attack, Account.	2015-05-29
Firewall	Add a Firewall rule to allow ICMPv6 to LAN	Helps make IPv6 work!	2015-06-16
LAN	Disable NAT	if customer has a public IP block	2015-02-01
Services	Disable SNMP		2015-02-01
Services	Disable 3G backup		2015-02-01
Firewall	Disable 'DoS Protection Blocking'	as it does odd things, like blocking WebUI over WiFi	2015-06-16
Services	Change NTP servers	to be time.aa.net.uk and 0.uk.pool.ntp.org	2015-02-01
Users	Change 'supervisor' password	Setting on Control Pages	2015-02-01
Users	Change 'admin' password	Setting on Control Pages	2015-02-01
Firewall	Change Remote Management Options	Further Settings on Control Pages	2015-02-01
QoS	Change QoS	to give upstream priority based on 'Packet Length' See: VMG1312: QoS	2015-02-01
Firewall	Change 'Deny Ping Response' to Disable,	to allow the router to reply to ping.	2015-02-01
QoS	Disable the default QoS Classes	See: VMG1312: QoS	2015-02-01
User	Remove the default read-only zyuser user		2015-02-01

• Static routes are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.

This list may not be exhaustive, and may change over time.