FireBrick 2700 Configuration run-through: Difference between revisions
No edit summary |
No edit summary |
||
<rule name="RTP" target-ip="90.155.91.8/29" protocol="17" target-port="1025-5059 5070-" set-graph="RTP"/>
</pre>
This also sets a graph for RTP
== Restricting FireBrick Config access ==
You may only want to allow access to the FireBrick webserver from your LAN, do this in the http service, eg, change the current line to:
<pre><http allow="90.155.1.1/28"/>
</pre>
= Native IPv6 =
|