FireBrick 2700 Configuration run-through: Difference between revisions
The default configuration (or a fully-loaded FireBrick) looks like this:
▲<?xml version="1.0" encoding="UTF-8"?>
▲<config xmlns="http://firebrick.ltd.uk/xml/fb2700/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://firebrick.ltd.uk/xml/fb2700/
http://firebrick.ltd.uk/xml/fb2700/0.00.605.xsd"
timestamp="1970-01-01T00:00:07Z"
comment="Temporary IPs for setup only, delete when finished configuring"/
comment="Example PPPoE config for DSL/FTTC/FTTP/etc"/
firewall rule - block incoming"
though"/
</pre>
Which sets up the 4 Ethernet ports as separate LANs, and an IP of 10.0.0.1 (and 2001:DB8::1) with the FireBrick acting DHCP server on the first port. So, connecting a computer to Port 1 should get you a 10.0.0.x IP address, and you can access http://10.0.0.1
Port 4 is set as an example of a PPPoE client, we'll set this up a little later.
= Configuring Initial Basic Settings =
|