FireBrick 2700 Configuration run-through: Difference between revisions
(added note about deleting IPv4 tunnel endpoint on clueless) |
|||
|
Your computers should then get IPv6 details. test on http://ip.help.me.uk.
If you previously had your IPv6 allocation routed over a Protocol 41 tunnel to a tunnel end-point machine on your LAN, you now need to remove that on clueless to allow native IPv6 to the FB. Log in to clueless and simply clear the IPv4 endpoint address, and save the changes. You then need to drop the connection to AAISP, and re-connect, for the routing change to take effect. Also remember to shut down your LAN tunnel endpoint, so it's not still announcing routes it can't honour any more.
If you need to use Tunnelled IPv6, rather than Native, see this page: *[[FireBrick 2700 v6 Tunnel]]▼
▲If you still need to use Tunnelled IPv6, rather than Native, see this page: *[[FireBrick 2700 v6 Tunnel]]
So, our config will look like this:
| |||