Revision as of 01:22, 10 January 2012 (view source) SimonIremonger (talk \| contribs) (→‎Really disabling the firewall) ← Older edit		Revision as of 01:28, 10 January 2012 (view source) SimonIremonger (talk \| contribs) (→‎Firmware Versions) Newer edit →
==Firmware Versions== Version 8.4.4.I1 is the factory default (as of November 2011) Version 8.4.7.0 is IPv6 enabled Upgrading from 8.4.4.1 is arranged by AAISP via the TR-069 CPE WAN Management protocol. This involves installing the "isp.def" as needed to persuade the router to connect to AAISP's TR-069 servers and asking AAISP to request the upgrade. ===Admin Settings=== When configured by A&A, the default username from the LAN side is: Administrator and from the WAN: aaisp. The password will be printed on the card on the base of the router, and also seen on the control pages. ===Setting up Routed Config=== Use the configuration-wizard (Firefox seems to work best) and choose ADSL(Expert). TODO: Describe where to find this. ===Adding Static-routes=== TODO: Fill this out, Apparently done over the telnet interface? ===Really disabling the firewall===

IPv6 Routers (view source)