Revision as of 07:03, 23 December 2024 (view source) Adsb (talk \| contribs) m (PPPoE and PPPoA) Tags: Mobile edit Mobile web edit ← Older edit		Revision as of 07:04, 23 December 2024 (view source) Adsb (talk \| contribs) m (NAT) Tags: Mobile edit Mobile web edit Newer edit →
For IPv4, note down the single /32 address and additional subnet range that you should have been assigned. The single address is the router's external address and the subnet is your LAN. AAISP will supply provider address space. For obvious reasons, this cannot be moved between suppliers. You may wish to consider ~~NTp~~NAT ~~configuraration~~configuration, which will allow you to use a private address internally. This will avoid the need to readdress should you move supplies, and will also make multi provider WAN easier to deploy, see [https://doc.pfsense.org/index.php/Multi-WAN_for_IPv6 Multi-WAN for IPv6 on PFSense documentation site] = Configuration =

Router - PFSense (view source)