Debian IPv6 Tunnel Config: Difference between revisions
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
This could be it !! : |
This could be it !! : |
||
<pre> |
|||
auto 6in4 |
|||
iface 6in4 inet6 v4tunnel |
|||
address 2001:8b0:XXXX::1 |
address 2001:8b0:XXXX::1 |
||
netmask 48 |
|||
local <ppp0 IPv4 IP> |
|||
endpoint 81.187.81.6 |
endpoint 81.187.81.6 |
||
gateway ::81.187.81.6 |
|||
ttl 64 |
|||
up ip -6 route add default dev 6in4 |
|||
</pre> |
|||
Revision as of 16:58, 16 February 2011
Draft in progress .....
Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end:
remembering to change the XXXX to whatever value you've been allocated.
After that just type "ifup 6in4" (as root) and your link should be up.
This could be it !! :
auto 6in4
iface 6in4 inet6 v4tunnel
address 2001:8b0:XXXX::1
netmask 48
endpoint 81.187.81.6
gateway ::81.187.81.6