IPsec Firewall: Difference between revisions
mNo edit summary |
mNo edit summary |
||
|
*IP protocol ESP (50) for the data channel.
Example:
<syntaxhighlight>
<rule-set name="IPsec" source-interface="pppoe" target-interface="self" no-match-action="continue" comment="Non-NATed IPsec connections from PPP to the Brick">
The config force-NAT option [Note the capitalisation ] can be used to force IKE to treat the connection as if it was NATed. This is in the top-level ipsec-ike config item and you need "Show all" on the UI.
Example:
<syntaxhighlight>
<rule-set name="IPsec" source-interface="pppoe" target-interface="self" no-match-action="continue" comment="Allow NATed IPsec connections from PPP to the Brick">
</syntaxhighlight>
You can join the two rules to create a set that will work for NAT and
Example:
<syntaxhighlight>
<rule-set name="IPsec" source-interface="pppoe" target-interface="self" no-match-action="continue" comment="Allow NATed and Non-NATed IPsec connections from PPP to the Brick">
| |||