FireBrick Road Warrior Windows 10: Difference between revisions
The following instructions were tested on a Windows 10 system. Setup on other versions of Windows will be similar, but the
dialogs and messages seen may not be exactly as shown here.
 
===Download the Certificate===
 
The CA certificate needs to be installed on the Windows machine using an account with administrator privileges.
 
First, download the CA certificate in DER format to the Windows machine. The easiest way to do this is to@
use#Use a browser (ed 'Edge') to visit your FireBrick certificate management page, and click on the Download DER link corresponding
##Go to: Config - Certificates to reach the certificate management page
to the CA certificate. Save it in a suitable location on the Windows machine. Note that you must download the certificate in DER format - windows machines do not▼
##Click on the Download DER link corresponding to the CA certificate.
recognize PEM format. The file will be given the <tt>.crt</tt> extension.
▲to the CA certificate. ##Save it in a suitable location on the Windows machine. Note that you must download the certificate in DER format - windows machines do not recognize PEM format. The file will be given the <tt>.crt</tt> extension.
#If using the 'Edge' Browser, then click the Open button once the file as downloaded
 
==Install the certificate==
Retrieved from ‘http://support.aa.net.uk/FireBrick_Road_Warrior_Windows_10’