FireBrick 2700 Configuration run-through: Difference between revisions
You will have configured the IP and Netmask on the 'LAN' tab. But there's no 'Gateway', so we must go to 'Advanced' -> 'Static Routes' tab, and create one. Enter it as follows: IP, Mask = base address of your internal LAN; eg: 81.xx.xx.0, 255.255.255.192. The 'Gateway' address is pointing back at the FB, eg 192.168.1.1. Check the box to Activate the route, hit the 'Apply' button, and that's it done.
You need to telnet in to the CLI to set the route. The commands to set a route back to 81.x.x.0 via the FB at 192.168.1.1 are:
|