Router - EchoLife HG612: Difference between revisions

Line 75:

To upgrade to this firmware, do the following:

* With the HG612 powered off, connect a cable between the LAN2 port

(you may need to remove the "not in use" sticker) and the ethernet

**(you may need to remove the "not in use" sticker) and the ethernet

port on your computer.

* Configure your computer's ethernet port with the IP address

192.168.1.100 and subnet mask 255.255.255.0.

**192.168.1.100 and subnet mask 255.255.255.0.

⚫

* Hold down the reset button on the back of the HG612 whilst inserting the power cable. Keep the rest button held for about 5-10 seconds after powering up.

⚫

* After about 10 seconds you should be able to access the HG612's "Update Software" web page at the address http://192.168.1.1

⚫

* Hold down the reset button on the back of the HG612 whilst inserting

the power cable. Keep the rest button held for about 5-10 seconds

after powering up.

⚫

* After about 10 seconds you should be able to access the HG612's

"Update Software" web page at the address http://192.168.1.1

* Follow the on-screen instructions to upload the latest firmware.

Line 94:

Line 87:

main web interface at the same http://192.168.1.1 address. The

default username and password are "admin" and "admin".

=How to connect to your router=