Stopping Open DNS - FireBrick 105: Difference between revisions
(Created page with "=FireBrick 105:= In a factory state the Fillters on a FireBrick 105 will not allow DNS to the FireBrick from the WAN - the default state is to block incoming traffic, but to a...") |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:Firebrick105.gif]] |
|||
=FireBrick 105:= |
=FireBrick 105:= |
||
In a factory state the Fillters on a FireBrick 105 will not allow DNS to the FireBrick from the WAN - the default state is to block incoming traffic, but to allow outgoing traffic. |
In a factory state the Fillters on a FireBrick 105 will not allow DNS to the FireBrick from the WAN - the default state is to block incoming traffic, but to allow outgoing traffic. |
||
Revision as of 10:10, 18 Haziran 2013
FireBrick 105:
In a factory state the Fillters on a FireBrick 105 will not allow DNS to the FireBrick from the WAN - the default state is to block incoming traffic, but to allow outgoing traffic.
However, in some cases, customers disable the firewall by adding a rule that allows all traffic in. In this case, a new rule is needed to block DNS to the FireBrick.
Create a Firewall filter to block port 53, from the WAN to the FireBrick, and make sure it's before any other rule that may allow this traffic in:
Name: BlockOpenDNS Source: WAN Target: FireBrick (The name of your FireBrick) Action: Drop Target ports: 53 Protocol: UDP
