Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick SIP Configuration: Difference between revisions

FireBrick SIP Configuration (view source)

Revision as of 13:26, 10 October 2012

269 bytes added ,  10 October 2012
no edit summary
No edit summary
No edit summary
Also see: [http://www.firebrick.co.uk/fb2700/voip.php FireBrick VoIP Page] which has more details about the feature.
 
Taking an example of a single SIP account with AAISP, and a couple of SIP phones, a FireBrick can be configured as follows: .
 
We'll set this up so that incoming calls route to a 'ring group', which in turn will route to a number of internal extensions. Outgoing calls from the local phones will all go out via the single SIP account with the service provider.
 
Go to Config - Edit - Setup - Edit VoIP config.
 
==Add a carrier==
!!Add a carrier This is the SIP account that you're connecting to:
 
{| border="1" cellpadding="1" cellspacing="1"
|-
| extn
| Internal extension number to call for incoming calls, 100
|-
| allow
then if you go to Status - VoIP, you should see the Carrier listed with an expiry - this shows that the FireBrick is registered to the server
 
==Next create some users:==
Config - Edit - Setup - Edit VoIP config
These will be your local SIP user accounts that your telephones use to register against the FireBrick with.
AA-Andrew
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,341

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/1436’