Category:Technicolor DGA0122: Difference between revisions

← Older edit

Category:Technicolor DGA0122 (view source)

Revision as of 10:26, 26 February 2024

885 bytes added , 26 February

m

→‎Bugs & workarounds

AA-Andrew

autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators

12,341

edits

Revision as of 22:29, 4 March 2021 (view source) AA-Andrew (talk \| contribs) m (→‎DGA0122 and DWA0120) ← Older edit		Latest revision as of 10:26, 26 February 2024 (view source) AA-Andrew (talk \| contribs) m (→‎Bugs & workarounds)
(11 intermediate revisions by 3 users not shown)
[[File:DWA0120-ports.png\|200px\|thumb\|DWA0120 Ports]] [[File:DGA0122-inside.png\|200px\|thumb\|DGA0122 Inside]] [[File:Technicolor-serial-label.jpg\|200px\|thumb\|Example default serial sticker]] These pages are about the DGA0122 and the DWA0120. These two routers are similar, the main difference being that the ~~DGA0122~~DWA0120 does not have the analogue phone ports for [[DGA0122_VoIP\|VoIP]]. ==DGA0122 and DWA0120== '''Notable Differences:''' DGA0122 has two analogue telephone ports (ATA) for [[DGA0122_VoIP\|VoIP support]] ==Basic Specs== 4x 10/100M/1,000M ports. Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast) WiFi is: 2.4GHz WiFi-4, (2x2) IEEE 802.11n 5GHz, WiFi-5, (3x3) IEEE 802.11ac 2 FXS ports, (ATA) for connecting anstandard analogue phone devices to a [[DGA0122_VoIP\|VoIP account]] '''DGA0122 only''' ==User information== ADSL1, ADSL2+ VDSL (FTTC) ''G.Fast'' - ~~using the~~plug Ethernet WAN port connected '''to an existing G.FAST modem''' ''FTTP, FTTPoD'' - ~~using the~~plug Ethernet WAN port '''to the fibre termination 'modem'''' - suitable for 1G/s FTTP (see note on speeds) ~~Not~~'''Bridge ~~usable~~mode:''' asThe aautomatic ~~'bridge'~~A&A orconfiguration will not configure these routers as '~~modem~~bridge'. ifIf you want to use your own PPPoE router. In this case our basic ZyXEL is a better choice, or you can configure it manually: https://support.aa.net.uk/DGA0122_Bridge_Mode ===Speeds=== This router can be used with faster FTTP circuits, eg up to 1Gb/s. Throughput on wifi will be limited to much lower speeds, but devices connected using wired connections should see around 950 Mbps when using our speed tester. ==Admin and WiFi passwords== !Once configured \|- !IP: \|192.168.1.1 \|192.168.1.1 or your public block \|- !Username: \|colspan="2" \|admin (or engineer for some superpowers) \|- !Password: \|rowspan="3"\| as stated on the ~~ZyXEL~~ rear panel \|rowspan="3"\| as printed on the A&A card \|- !Wifi Name: \|- !WiFi Password: \|} ==Bugs & workarounds== Sadly, CPE has always had some quirks or bugs. We've identified a couple of ~~bugs~~problems with the DGA0122 and have listed them here: [[DGA0122_Public_IPs\|Unable to set or change the LAN address when using public IPs]] [[DGA0122_CQM_Graphs_Show_Latency\|CQM graphs show latency spikes]] [[DGA0122_No_IPv6\|IPv6 seemingly enabled, but not actually working]] * Having problems with a Sonos smart speaker? Try a reboot of the Sonos as short term fix, or use a cable... see: https://support.sonos.com/en-us/article/technicolor-dga0122-compatibility [[Category:AA Routers]]