12,341
edits
Category:Technicolor DGA0122: Difference between revisions
m
→Bugs & workarounds
m (The DGA0122 has 2 VoIP ports, the DWA0120 doesn't) |
|||
| (5 intermediate revisions by 2 users not shown) | |||
|
'''Notable Differences:'''
*DGA0122 has two analogue telephone ports (ATA) for [[DGA0122_VoIP|VoIP support]]
==Basic Specs==
*4x 10/100M/1,000M ports.
*Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)
*WiFi is:
**2.4GHz WiFi-4, (2x2) IEEE 802.11n
**5GHz, WiFi-5, (3x3) IEEE 802.11ac
*2 FXS ports, (ATA) for connecting
==User information==
*ADSL1, ADSL2+
*VDSL (FTTC)
*''G.Fast''
*''FTTP, FTTPoD'' -
'''Bridge mode:''' The automatic A&A configuration will not configure these routers as 'bridge'. If you want to use your own PPPoE router. In this case our basic ZyXEL is a better choice, or you can configure it manually: https://support.aa.net.uk/DGA0122_Bridge_Mode
===Speeds===
This router can be used with faster FTTP circuits, eg up to 1Gb/s. Throughput on wifi will be limited to much lower speeds, but devices connected using wired connections should see around 950 Mbps when using our speed tester.
==Admin and WiFi passwords==
!Once configured
|-
!IP:
|192.168.1.1
|192.168.1.1
|-
!Username:
|colspan="2" |admin (or engineer for some superpowers)
|-
!Password:
|rowspan="3"| as stated on the rear panel
|rowspan="3"| as printed on the A&A card
|-
!Wifi Name:
|-
!WiFi Password:
|}
*[[DGA0122_CQM_Graphs_Show_Latency|CQM graphs show latency spikes]]
*[[DGA0122_No_IPv6|IPv6 seemingly enabled, but not actually working]]
* Having problems with a Sonos smart speaker? Try a reboot of the Sonos as short term fix, or use a cable... see: https://support.sonos.com/en-us/article/technicolor-dga0122-compatibility
[[Category:AA Routers]]
| |||