Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VoIP Phones - Yealink DECT: Difference between revisions

m
(20 intermediate revisions by the same user not shown)
<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator>
__NOTOC__
[[Image:W53P-1.png|thumb|Yealink W60B base and handset]]
= Configuring Yealink DECT phone for AAISP =
 
Relevant to: '''Yealink W60B'''
 
The Yealink W60B is a DECT base station aimed at small and medium-sized businesses, is perfectly suitable for home use too. Its main specifications are:
*Up to 8 handsets
*Up to 8 SIP accounts
*Up to 8 simultaneous calls
*Support for additional 'DECT repeaters'
*IPv4 and IPv6
*PoE or Mains plug for power
 
=Credentials=
[[Image:W53P-1.png|thumb|Yealink]]
 
{|class="wikitable" style="text-align:center;
!Password:
| admin
|contact us
|-
!PIN:
| 0000
|contact us
|}
The PIN is used to register handsets to the base station, and for the handset to access settings from the base station.
 
= IP address =
|600
|}
 
Repeat this for any other accounts you want to add.
 
===Check the SIP registration status:===
 
You should the the account Status as 'Registered'
 
===Handset Assignmnent===
 
[[File:Yealink W53P Hanset Assignment.png|thumb|Handset Assignment]]
===Handset AssignmnentAssignment===
Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets!
 
Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets! You can also make up to 8 calls at once, so a single base station can support a small office of people.
 
Account -> Number Assignment
 
=== Audio settings ===
 
In menu:
Settings -> Telephony -> Audio" select "Voice Quality -> Own Codec preference".
 
For "IP1" (Or whatever you call the AAISP account) remove all codecs except "G.711 a law". This setting will generally give the best audio quality.
 
 
===Other optonal settings===
Features -> General Information -> Call Waiting --> set to Disabled
Features -> General Information -> Number Of Active Handsets --> Set to 8 (if you have more than 4 handsets)
Settings -> Time&Date -> Time Zone -> 0 GMT
Features -> General Information -> Fwd International --> set to Disable (no need to allow forwarding to international numbers)
Settings -> Time&Date -> Primary Server -> time.aa.net.uk
Features -> Phone Lock --> Add 999 to the list of emergency numbers
Settings -> Time&Date -> Date Format -> YYYY-MM-DD
Settings -> Time&Date -> Time Zone --> 0 GMT
Settings -> Time&Date -> Primary Server --> time.aa.net.uk
Settings -> Time&Date -> Date Format --> YYYY-MM-DD
Settings -> Tones --> Set to Great Britian
Account -> Handset Name --> Give a name to each handset, will be displayed on their screen
 
==Transfer a call==
 
Say you have an incoming call that you've answered, and you want to transfer it to someone else and introdice the caller as you go...
* '''Answer''' the incoming call, and find out who they want to be transferred to
*Press the '''TRAN''' button
**At this point the caller is put on hold
*'''Enter in the extension number''' or full number of who you want to transfer the call to
*Press the '''Green dial''' button
**At this point you will be ringing the third party
**If no answer, then you can press the button under '''End''' to go back to the originalloriginal caller
**At this point you can also Blind transfer the call, by pressing the button under '''Transfer'''
*Once answered, you can introduce the original caller and press the button under '''Transfer'''
 
==DND - Do not disturb==
You can enable/disable DND via the handset for each of the SIP accounts allocated to the Yealink handset:
OK --> Call Features (orange) --> Do Not Disturb
 
==Factory reset the Yealink DECT Base Station==
There are a few ways to factory reset the Yealink base station:
 
===From web ui===
Settings -> Upgrade --> Reset
 
===From a connected handset===
OK -> Settings -> System Settings -> Base Reset
You'll need to know the PIN (default is 0000)
 
===From the actual base station===
# Unplug the power
# Press and hold the Connect button
# Whilst holding, plug in the power
# Wait until all three lights on the base station are showing as solid green
# Release the connect button
# Wait a further 5 minutes
# Then, reboot the base station by unplugging it from power and plugging it back in
 
=Registering an additional Handset=
# Power up handset
# Press the button under 'Reg'
# Hold the button on the Base for 3 seconds
# Handset should then initialise
# Go to the Base station UI and set up the new account:
# Account - Number Assignment - or set up a new account:
## Account - Set Account2 --> Fill in details
## Account - Handset name --> Set the name
 
 
==Firewall & Security==
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,341

edits