Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Ethernet Port Settings: Difference between revisions

Ethernet Port Settings (view source)

Revision as of 07:33, 26 June 2025

22 bytes added ,  26 June
m
→‎SFP Requirements for customer router
 
===SFP Requirements for customer router===
*For 1Gbit/s bearers, the connection from the Openreach NTE to the customer equipment is presented using multimode mode fibre on LC connectors. A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port. We can supply a suitable SFP and cable if you require.
*A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port.
*We can supply a suitable SFP and cable if you require.
 
This link should be used with an auto-negotiation port, which is the default for gigabit links.
 
<gallery widths=250 caption=Some photos>
Etherway-ONT.JPG|Openreach NTE for 1G circuits
SFP-SX.jpg|SX SFP for customer equipment
AA-Andrew
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,582

edits

Retrieved from "http://support.aa.net.uk/Special:MobileDiff/17740"