editor
706
edits
FTTC Modem: Difference between revisions
m
clean up, typos fixed: However → However,
mNo edit summary |
m (clean up, typos fixed: However → However,) |
||
| (6 intermediate revisions by 4 users not shown) | |||
|
[[Category:Routers]]
=No longer supplied=
= Related Pages on the A&A Website: =▼
Note, these Openreach modems are no longer supplied.
*[http://www.aaisp.net.uk/broadband-FC.html www.aaisp.net.uk/broadband-FC.html]
*Huawei EchoLife HG612
Openreach tend to install the FTTC modem to match the DSLAM in the Cabinet. However,
[[File:FTTCModems.png|600px]]
[[File:FTTCModem-LEDs.png|600px]]
The FTTC modem supplied by Openreach is described in detail on [http://www.
=Router Throughput=
=FireBrick 2700=
The Firebrick 2700 is a great router for FTTC, and even bonding FTTC. See the [[:Category:FireBrick|Firebrick]] pages for more info
=Testing and using FTTC with just a computer=
=RFC 4638 Information=
When using a router with an external modem, one has to use PPPoE on the router as the connection method. This normally means that the MTU on the PPPoE link
can be no higher than 1492 octets (PPPoE has an 8 octet overhead, and the whole packets has to fit in a 1500 octet Ethernet frame). However, there is a
technique to use ''baby jumbo frames'' to extend the Ethernet frame size to 1508 octets and allow the full 1500 octets on the PPPoE link.
=RFC 4638 OpenWRT 12.09 (Attitude Adjustment)=
Patches for WNDR3x00 are available at https://github.com/mattwillsh/openwrt-wndr3x00-rfc4638
| |||