{Administrator}=>nat ifconfig translation=enabled intf=mobilebroadband
5 KB (824 words) - 00:18, 18 August 2018
...ok to see if a bridge configuration is possible, double NAT, or moving the NAT boundary from the firewall to the router. In my example I have a /29, so th
.../29 addresses for all outbound traffic - you can do this using Firewall -> NAT -> Manual
18 KB (2,870 words) - 11:24, 8 December 2022
| Home Network || Disable NAT || If customer has a public IP block || 2015-02-01
5 KB (810 words) - 00:22, 18 August 2018
On AAISP I have decided to run a NAT-free home network.
6 KB (999 words) - 09:36, 25 February 2015
* At present the data makes use of a NAT Internet connection which is unfiltered. We hope to have a more direct APN
9 KB (1,712 words) - 23:54, 18 December 2018
...you want (yet another component). If you have Network Address Translation (NAT), that is usually in the router itself, and may mean you don't have to both
11 KB (2,057 words) - 00:04, 18 August 2018
...] range you have been assigned by AAISP (remember, in [[IPv6]] there is no NAT and the like, all your devices are directly routable and this is why the [[
14 KB (2,570 words) - 11:23, 22 June 2017
<subnet ip="2001:DB8::1/64 10.0.0.1/24" nat="true" comment="Temporary IPs for setup only, delete when finished configur
<subnet ip="2001:DB8::1/64 10.0.0.1/24" nat="true" comment="Temporary IPs for setup only, delete when finished configur
25 KB (3,973 words) - 22:57, 26 March 2022
